1992 Jeep Cherokee Laredo
Need the wiring diagram for the factory radio, trying to hook up an alpine to it, but the wires are not even close in color, so i have no idea what connects to what..
Thanks
-David
Attention all members!
Have a cool ride? Then show it off on our website! All vehicles welcome!
Have a cool ride? Then show it off on our website! All vehicles welcome!
1992 Jeep Wiring Diagram
-
Justin from Detroit1
- Junior Member
- Posts: 0
- Joined: Wed Dec 31, 1969 6:00 pm
- Location: Detroit
Go to best buy and buy a wiring harness, seriously you don't want to cut into the factory wiring if you don't have to. It will cost you $8 and save you a TON of time and possible problems down the line.
That being said, if you are still foolish enough to cut the factory wiring...
Constant 12V+ Red/White
Switched 12V+ Purple/White
Ground Black
Illumination Blue/Red
Dimmer Red/Black
Antenna Trigger Purple/Orange
Antenna Right Front
Front Speakers 5 1/4" Doors
Left Front (+) Gray
Left Front (-) Yellow
Right Front (+) White/Red
Right Front (-) Brown/Red
Rear Speakers 5 1/4" Rear Deck
Left Rear (+) Gray/White
Left Rear (-) Brown/White
Right Rear (+) White/Black
Right Rear (-) Brown
edit : I take no responsibility for this list. It is what my program says, I do not guarantee it is right. Use a multimeter and check the power wires to be safe.
That being said, if you are still foolish enough to cut the factory wiring...
Constant 12V+ Red/White
Switched 12V+ Purple/White
Ground Black
Illumination Blue/Red
Dimmer Red/Black
Antenna Trigger Purple/Orange
Antenna Right Front
Front Speakers 5 1/4" Doors
Left Front (+) Gray
Left Front (-) Yellow
Right Front (+) White/Red
Right Front (-) Brown/Red
Rear Speakers 5 1/4" Rear Deck
Left Rear (+) Gray/White
Left Rear (-) Brown/White
Right Rear (+) White/Black
Right Rear (-) Brown
edit : I take no responsibility for this list. It is what my program says, I do not guarantee it is right. Use a multimeter and check the power wires to be safe.
it was kinda close, a couple of them matched up, but for the most part i just had to use a multi meter, thanks any wayJustin from Detroit wrote:Go to best buy and buy a wiring harness, seriously you don't want to cut into the factory wiring if you don't have to. It will cost you $8 and save you a TON of time and possible problems down the line.
That being said, if you are still foolish enough to cut the factory wiring...
Constant 12V+ Red/White
Switched 12V+ Purple/White
Ground Black
Illumination Blue/Red
Dimmer Red/Black
Antenna Trigger Purple/Orange
Antenna Right Front
Front Speakers 5 1/4" Doors
Left Front (+) Gray
Left Front (-) Yellow
Right Front (+) White/Red
Right Front (-) Brown/Red
Rear Speakers 5 1/4" Rear Deck
Left Rear (+) Gray/White
Left Rear (-) Brown/White
Right Rear (+) White/Black
Right Rear (-) Brown
edit : I take no responsibility for this list. It is what my program says, I do not guarantee it is right. Use a multimeter and check the power wires to be safe.
-Dave
-
lancerswimmer89
- Member
- Posts: 65
- Joined: Sat Dec 16, 2006 11:53 am
- Location: Clinton Township
Wiring
You might wanna try talking to Swimmerdude, i think he has a jeep of a similar year, and he might b able to hook u up.