"floor" of trunk not level, where to place sub box

[frankiebones]

i have a 10" sub in a Q Logic Sealed Enclosure. However, because the spare tire is stored underneath, the "floor" of the trunk isn't level. See below pic:




approx size of box (although its not centered but u get the idea):



If I was to mount it towards the back of the car (where the "floor" is level), would this effect sound quality at all?

[Darthness]

if im reading this correctly... probably won't have much of an effect. but thats just with my experiences.

[GlassWolf]

level won't matter.
if you want to make it level, just use some plywood or MDF and ut a template to match the drop in the floor and use it as a bottom edge for the sub box.
like having the box on legs.

[frankiebones]

level won't matter.
if you want to make it level, just use some plywood or MDF and ut a template to match the drop in the floor and use it as a bottom edge for the sub box.
like having the box on legs.

but ur saying that even if i place the box in the back, where it will point upwards bc of the uneven trunk, it wont matter? which would be better, all things considered.

thanks bro

[ridr4lif]

The subs dont need to be perfectly level in order to play correctly.

Im sure being off kilter slightly wont affect performance that much. Just make sure the sub faces the back of the car if you have it in a trunk.

If its a hatch/suv, face it upwards.

[High Society]

http://www.caraudiocentral.net/forums/s ... .php?t=233

[les_gobich]

Its only going to be in the back of your head if its level or not. unless your going to sema or sumthin but i doubt that......so who cares. like they said level wont affect the performance

[Darthness]

nice.. bumping up a 6 month ol dthread.

[alteraudiousa]

fiberglass the bottom and make spacers to make it level

[Darthness]

thanks for bumping a 6 month old thread.