Wiring Help

[lost05]

I want to run 2 1000w amps and 1 350 watt amp how do i set up the wiring? i want an amp for each sub and then i have an amp for my rear speakers any help would be perfect thanks

[ridr4lif]

You could use a 3(if they make them) or 4 way distribution block.

Use something big, maybe 0 guage from the battery to the distribution block and then use something like 2 or 4 for the 1000 watt amps and using 8 on the smaller amp should be fine.

What subs are you running where you need 1000 watts a piece? I hope you plan on running a larger (much larger) alternator, bc thats a lot of power to be drawing.

tedd

[lost05]

2 alpine type rs the amps are 600 watt rms

[lost05]

and wouldnt it have to be a 4 way cause i have 1 coming in and 3 goin out

[ridr4lif]

http://www.crutchfield.com/S-OlJJgpocWI ... I=211DBR44

something like that. 4 way refers to the amount of outputs it has.

tedd

[dmeyer07]

You could use a 3(if they make them) or 4 way distribution block.

tedd

Yes they do make 3 way distro blocks, they are often called a "T" block.

FYI :)

[ridr4lif]

Yes they do make 3 way distro blocks, they are often called a "T" block.

FYI :)

ahh...didnt know that. Thanks dmeyer.

"its a good day when you learn something." a smart old man once told me that

tedd

[lost05]

thanks for all the help how much would an alternator like that cost and would a capacitor help at all until i but a new alt.!?

[Bwcad1]

Not Really The Cap Wont Do Much You Should Just Us Save The Money To Get A New Alternator I Suggest Execessive Amperage Alternator

[GlassWolf]

http://www.wickedcases.com/caraudio/capacitors.html
http://www.wickedcases.com/caraudio/charging.html
http://www.betteraudio.com/geolemon/newmain/battcapalt/
http://www.bcae1.com/charging.htm
http://www.bcae1.com/chargin2.htm
http://www.wickedcases.com/caraudio/batteries.html
http://www.the12volt.com/info/recwirsz.asp
http://www.optimabatteries.com/