how do you wire your headunit??

Tim · Post by **Tim** » Sun May 24, 2009 5:35 pm

Just got to thinking and got curious how you all like to wire the headunit.

Do you: use crimp caps

Do you: solder the connections and heat shrink em (or use black tape)

or

Do you: just twist em together and hope for the best??

Just thought Id start a new thread,

I use crimp caps or solder and heat shrink.

Tim

cool mr grinch · Post by **cool mr grinch** » Sun May 24, 2009 5:49 pm

i normally use heat shrink butt connectors.

smoker · Post by **smoker** » Sun May 24, 2009 6:01 pm

i use crimp caps, butt connectors are less reliable because teh wire does not get twisted first. so now one connectioin becomes like 3, id use just tape before using butt connectors....chain, weakest link thing, you get the pic

Ryan from Ohio · Post by **Ryan from Ohio** » Sun May 24, 2009 6:09 pm

Solder and heat shrink only.

As smoker points out, butt connectors suck nuts. I had an issue long ago with them and wont use them anymore.

The crimp caps wouldnt be to bad, but I like the security of the solder.

smoker · Post by **smoker** » Sun May 24, 2009 6:21 pm

the reality of it is that twist and tape is as secure as anything as long as you strip enough wire to twist it securly....but the crimp caps are quicker than using tape on every connection....

loudwagon15s · Post by **loudwagon15s** » Sun May 24, 2009 6:29 pm

i used to have problems with butt connectors, but then i found an old pair of crimping pliers in my dad's toolbox which really get a good crimp with lots of pressure and havn't had a problem since. Solder can be a pain sometimes

scotts1000rr · Post by **scotts1000rr** » Sun May 24, 2009 6:34 pm

smoker wrote:the reality of it is that twist and tape is as secure as anything as long as you strip enough wire to twist it securly....but the crimp caps are quicker than using tape on every connection....

And if you split the wire,It wont come apart.

cool mr grinch · Post by **cool mr grinch** » Sun May 24, 2009 7:05 pm

could somebody explain crimp caps?

i use heat shrink glue lined butt connectors. i've never had a problem.

scotts1000rr · Post by **scotts1000rr** » Sun May 24, 2009 7:15 pm

http://www.idealindustries.com/media/img/products/wire_termination/product/crimp_splice_cap_insulator.jpg

cool mr grinch wrote:could somebody explain crimp caps?
i use heat shrink glue lined butt connectors. i've never had a problem.

Bwcad1 · Post by **Bwcad1** » Sun May 24, 2009 7:18 pm

I use crimp cap's but soldier everything else. i used to use butt connectors and if i do its the heat shrink version.