Car Audio Central - Ultimate Car Audio Forum and Community

Ok here its my question I have an alphasonik PMA300CA 2-Channel High current Amplifier and i want to know if the ElevationAudio DX300.4 4-Channel Amp its better than the one i have now?
Here are the Spect on the ElevationAudio

Alphasonik Spect look like this
Features:
* 150 watts x 2 @4ohm
* 270watts x 2 @2ohm
* 450 watts x 2 @1ohm
* 475watts x 1 @4ohm
* 780 watts x 1 @2ohm
* 900 watts x 1 @1ohm
* Bridgeable
* Hour Meter
* Remote Mount PMA100V Digital Volt Meter
* Remote Mount PMA10B Bass Boost Control
* Heavy Duty One-Piece Extruded Aluminum Heat Sink
* Beveled Clear Acrylic Protective Cover
* Tiffany-Style RCA Jacks
* Parallel Line-Out RCA Jacks
* Removable Aluminum Side Covers Conceal Control & Terminal Panels
* MOSFET High-Speed Switching Power Supply
* Milspec Double-Sided Glass Epoxy Circuit Board w/ Through-Hole Plating
* Heavy 4 oz. Pure Copper PC Traces at All Preamp & Amplification Stages
* Solid Brass Nickel-Plated Terminal Blocks (PMA800 & 1000HCA
2-Gauge Power, 8-Gauge Speaker) (PMA150, 300, 600 & 640HCA
4-Gauge Power, 8-Gauge Speaker)
* Variable Low-Pass Filter: 50Hz~250Hz, 24dB/Octave
* Variable High-Pass Filter: 50Hz~250Hz, 24dB/Octave
* Variable Subsonic Filter: 20Hz~60Hz, 24dB/Octave
* Variable Bass Boost @ 45Hz: 0 ~ +18dB
* Variable Phase Shift: 0~180¾
* THD: < 0.05%
* Signal-to-Noise Ratio: >100dB
* Frequency Response: 5Hz~50kHz
* Input Impedance: 10k©
* Input Sensitivity: 200mV~8V
* 4-Way Protection Circuitry: Thermal, Short Circuit,
Overload & DC Offset
* Cooling Fan(s)
* Dimensions (W x H x U 91/16 x 2 5/8 x 16 1/6
Im a newbie when it come to this. But i read some where that the ElevationAudio its preaty clean and clear audio. if anybody can commend on this please

water wrote:Ok here its my question I have an alphasonik PMA300CA 2-Channel High current Amplifier and i want to know if the ElevationAudio DX300.4 4-Channel Amp its better than the one i have now?
Here are the Spect on the ElevationAudio

Alphasonik Spect look like this
Features:
* 150 watts x 2 @4ohm
* 270watts x 2 @2ohm
* 450 watts x 2 @1ohm
* 475watts x 1 @4ohm
* 780 watts x 1 @2ohm
* 900 watts x 1 @1ohm
* Bridgeable
* Hour Meter
* Remote Mount PMA100V Digital Volt Meter
* Remote Mount PMA10B Bass Boost Control
* Heavy Duty One-Piece Extruded Aluminum Heat Sink
* Beveled Clear Acrylic Protective Cover
* Tiffany-Style RCA Jacks
* Parallel Line-Out RCA Jacks
* Removable Aluminum Side Covers Conceal Control & Terminal Panels
* MOSFET High-Speed Switching Power Supply
* Milspec Double-Sided Glass Epoxy Circuit Board w/ Through-Hole Plating
* Heavy 4 oz. Pure Copper PC Traces at All Preamp & Amplification Stages
* Solid Brass Nickel-Plated Terminal Blocks (PMA800 & 1000HCA
2-Gauge Power, 8-Gauge Speaker) (PMA150, 300, 600 & 640HCA
4-Gauge Power, 8-Gauge Speaker)
* Variable Low-Pass Filter: 50Hz~250Hz, 24dB/Octave
* Variable High-Pass Filter: 50Hz~250Hz, 24dB/Octave
* Variable Subsonic Filter: 20Hz~60Hz, 24dB/Octave
* Variable Bass Boost @ 45Hz: 0 ~ +18dB
* Variable Phase Shift: 0~180¾
* THD: < 0.05%
* Signal-to-Noise Ratio: >100dB
* Frequency Response: 5Hz~50kHz
* Input Impedance: 10k©
* Input Sensitivity: 200mV~8V
* 4-Way Protection Circuitry: Thermal, Short Circuit,
Overload & DC Offset
* Cooling Fan(s)
* Dimensions (W x H x U 91/16 x 2 5/8 x 16 1/6
Im a newbie when it come to this. But i read some where that the ElevationAudio its preaty clean and clear audio. if anybody can commend on this please

EA is better than what you have now.

Depends on what your goal is.

You have a 2 channel amp with more rated power than the 4 channel amp.

So whats your goal?

The EA amp probably is a better build over the Alphasonic. Alpha is a "has been" company of the past. EA isnt exactly the best thing in the world either. Ive heard a decent amount of negative about them so Im not sure if I would buy them or not. Probably not if it was my money.

Sorry forgot to mention. yeah its going to power 4 LC6 from Elevation audio



I replace my factory speaker for 4 of this LC6 also added 4 tweeters



Im nah sure if the tweeters are getting power from the amp. I had some one doing it for me

WTH tweeters are those? E Bay "specials"?

Ryan from Ohio wrote:
WTH tweeters are those? E Bay "specials"?

yeah. well i got that pic from ebay. I didn't buy my from ebay the guy whos doing it bought it for me i don't know where