Page 5 of 6
Posted: Tue Mar 28, 2006 3:37 pm
by sinister audio
thats your cut list. its 1.75 cubes after sub and port displacement tuned to 32hz.
Posted: Tue Mar 28, 2006 3:42 pm
by chodecz
Thankyou!! RE recommend 1.8cuft, will there be any noticable difference with the 1.75cuft??? Did you use .15cuft displacement for the sub??
I've looked the the specs, and pictured it out.
So these are the exact cut outs of wood I need to make?? The box ends up being a sealed box,, how and where does the vent go in?? With a length of 21.68"??? I take it, this isn't one straight piece???
Posted: Tue Mar 28, 2006 4:42 pm
by sinister audio
it goes on the front and towards the side. and ya i took in the sub and port displacement and the vent will have to have a bend in there. and you will hear no difference what so ever between 1.75 cubes and 1.8 cubes.
Posted: Tue Mar 28, 2006 5:52 pm
by ridr4lif
Sorry for the big pic, but this is what most slot ported boxes look like. You can see the port on the left hand side of the box.
Posted: Wed Mar 29, 2006 1:19 pm
by chodecz
Ok, thank you.
Why have you made a sealed box with a completely different component for the slot?? And the cut list doesn't include info on the slot, like how I have to cut. Wouldn't it be easier and stronger to have the base and top run longer, then 1 side wall (to the far side) for the slot???
Please let me know, thanks.
Posted: Wed Mar 29, 2006 4:16 pm
by ridr4lif
http://www.kicker.com/06/tech-support/m ... 0Brief.pdf
Scroll down to page 15 (i think) on that and it will show you what to do.
Basically what you do is cut the board that the port is on a little shorter than the side opposite it and it creates a port. Then you need to make the port off of that. The link i pasted should show you what i mean.
Posted: Wed Mar 29, 2006 5:04 pm
by chodecz
Thanks ridr4lif.
I looked the the Kicker manual, but still dont get the cut sheet that sinister audio gave me. Why does the slot have to have 4 cut outs, why doesn't it utilise the actual box??????
Posted: Wed Mar 29, 2006 5:09 pm
by ridr4lif
I dno man...maybe PM Devin and see what he has in mind. his cut sheet kinda confuses me also.
Posted: Wed Mar 29, 2006 5:10 pm
by chodecz
Sh*t, looks like im on my own for this one
(((((((((.
Someone have a RE SE 12" box blueprint?????????
Or sinister maybe can you do a quick sketch??
Posted: Wed Mar 29, 2006 5:21 pm
by ridr4lif
Doesnt REAUDIO have box plans on their site???