Page 2 of 3
Posted: Sun Mar 06, 2005 5:55 pm
by dmeyer07
Good idea, but the way the amp rack/box is setup that wouldn't work.
Thanks anyway.
Posted: Mon Mar 07, 2005 1:40 pm
by dmeyer07
[HTML] Take all of the labeling off the amps.[/HTML]
How exactly do you do that without making the amp look like sh#t?
Any methods,etc?
Thanks
Posted: Mon Mar 07, 2005 1:43 pm
by ridr4lif
Are they stickers? If so get some goo gone.
TEDD
Posted: Mon Mar 07, 2005 1:48 pm
by dmeyer07
Nope they are not stickers, it looks like they may be painted on..
Posted: Mon Mar 07, 2005 2:01 pm
by William from NOLA
Sandpaper! lol
j/k
Posted: Mon Mar 07, 2005 2:06 pm
by dmeyer07
Sigh*...
Posted: Mon Mar 07, 2005 2:08 pm
by dmeyer07
What about something to chemicaly remove the paint?
hmm but if the heat sink is painted which it is i'm sure that paint would come off also...
Posted: Mon Mar 07, 2005 3:16 pm
by William from NOLA
The heatsink doesn't look painted, I'd definately use some sort of chemical paint remover. I'd only use as much as you need, don't let any get anywhere else. You may need to scrub the stuff off, so be careful to to scrub too hard.
Posted: Mon Mar 07, 2005 3:29 pm
by Justin from Detroit1
TSP?
(I am not responsible if it messes anythin up, but it will get rid of the labeling)
Posted: Mon Mar 07, 2005 4:33 pm
by dmeyer07
Email from the company.
Dear David,
We can turn the heatsink 180 degrees but it'll have to be done here.
The circuit board slides into the inner part of the heatsink.
Then all the FET's and Power transistors sit on the heatsink
platform on each side for heat dissipation.
If you can send us the amp here, we can do this for you.
There is a charge of $15 plus $10 UPS shipping back to you.
The model number and the log is silkscreened onto the heatsink.
It's not a sticker...