Autotek MM4000.1 or 2 US Amps MD3's?

Schmuck · Post by **Schmuck** » Mon Jun 18, 2007 5:54 am

Which would be better to power 2 15" HD3 dual 2 ohms? The MM4000.1 is refurbished and half the price and the MD3's are the 07 models and brand new

CaptainPioneer · Post by **CaptainPioneer** » Mon Jun 18, 2007 6:22 am

does the refurbished carry any warranty?

Bwcad1 · Post by **Bwcad1** » Mon Jun 18, 2007 7:04 am

damn i thought we gave you like 8 suggestions and answerd all your questions on the others?

get what ever you want ive already given you my suggestions like 4 times.

Schmuck · Post by **Schmuck** » Mon Jun 18, 2007 8:56 pm

I guess you say the MM4000.1 but the 2 MD3's would give me more power and are also strappable so I would only have to tune the master amp.

Bwcad1 · Post by **Bwcad1** » Tue Jun 19, 2007 3:27 am

so buy what you want dude. ive given you my recommendations like 3 times. apparently they dont make a diffrence.

smoker · Post by **smoker** » Tue Jun 19, 2007 7:14 am

when you strap amps you still have to tune them both, you just tune them together, its kinda weird though

Robert Wollenberg · Post by **Robert Wollenberg** » Tue Jun 19, 2007 7:26 am

what's the power difference? does it even matter? +3 db for every doubling of power ... 1-2-4-8-16-32-64-128-256-512-1024-2048-4096-8192. If you buy any amp putting out anything in the vacinity of 4k watts, you're not going to notice a difference from one to the next anyway. down to 2k is a loss of 3 db and up to 8k is a gain of 3db. you can do the math to figure out whether the difference in amps is worth it to you.

I'm not Bill, I can only hope to be like him one day. I have to stop in the 500-1k vicinity. Too much more than that and it's just not worth it to me.

Bwcad1 · Post by **Bwcad1** » Tue Jun 19, 2007 9:08 am

get a maxxlink then you only have to tune 1

cargodz · Post by **cargodz** » Tue Jun 19, 2007 11:35 am

Well I guess it's time for me to step into this one... As both an Autotek and US Amps dealer...
Let's do some simple math shall we
US Amps MD3 2000watts @ 1 ohm x2 = 4000 watts

Autotek MM4000.1D 4000watts @ 2 ohm

Not that hard to figure out by my book :)

Bwcad1 · Post by **Bwcad1** » Tue Jun 19, 2007 11:37 am

cargodz wrote:Well I guess it's time for me to step into this one... As both an Autotek and US Amps dealer...
Let's do some simple math shall we
US Amps MD3 2000watts @ 1 ohm x2 = 4000 watts
Autotek MM4000.1D 4000watts @ 1 ohm
Not that hard to figure out by my book :)

apparently it is because the autotek is 4000x1 @ 2ohm

What coils are on your HD3