Yay money is being wasted

CaptainPioneer · Post by **CaptainPioneer** » Thu Jan 11, 2007 8:27 am

The one thing i love about Dodge is the fact that their warrantees cover absolutely nothing... My truck has been making some very loud noise for a while from its rear end... Dodge has reccognised that the Pinion bearings were faulty on dodge trucks and did nothing about it! Assholez! oh well it has to be done sooooo.

Im pretty sure that its the Pinion Bearing, so i want to have that replaced... I would like to do it myself but Dad says no lol... but anyway going to get that done. Secondly, i noticed that my Engine is starting to knock.... 105k miles on it... Im going to take of the valve covers when i come back home to take a look at it, Im pretty sure that there is something being shot around in there for some reason...

Thirdly, my rotors in the front are sooo worn and warped, so im putting new ones on... Guy said $200 for resurfacing, I said F that and am buying some new Cross Drilled and strait drilled rotors for $100 and doin it myself.

Clutch is going to but i dont think i can do that myslef... so im going to buy a clutch from someone for about $165 and have a mechanic install it, seeing as most the guys around here charge like $500 for a clutch install some guy even quoted me at $800!!! I have a frined who is a good mechanic who will only charge me for labor so im going with him....

All in all im saving money, but it was a necessary fix to my truck

Tygur · Post by **Tygur** » Thu Jan 11, 2007 10:05 am

Sounds like you drive it pretty hard... hehe

CaptainPioneer · Post by **CaptainPioneer** » Thu Jan 11, 2007 10:13 am

At times i have definitely driven it hard... No argument there but comparitively, this truck has been babied for a long time... we are the original owners on it from 96 till now... 11 years old, and its still running and only has 105k on it, which is pretty low for a truck that age...

Really the reason the Clutch is going is because all of me and my 2 other brothers learned how to drive stick on that truck, and trust me they suck at stick so they really f'd it up...

That Pinnion, im guessing is half my fault and half the factory,.... I have done a few Burnouts in that truck and ill be willing to take the blame on that going.... But the front brakes warping has really little to do with me. Dodge just doesnt make great Rotors on the 1500's especially the one that is the lowest line u can get.... (I dont even have Air conditioning, or power anything, well Power steering and brakes lol)

Also Ive had to have the Fuel Rail completely replaced b4 as well as injectors and the Serpentine belt, and Cat, All for $1600! Fuel Rail was Dodges fault again... It was rusting on the inside and clogging up the fuel system....

Cat shouldnt have gone that early either... Serpentine was badly alligned/ tightend from the factory, again Dodge's fault....

I know ur hearing a lot of negative from me about Dodge, but i do love my truck and woudnt trade it for anything! well cept a 2500 V8 Hemi with a 5 or 6 spd stick in it... prolly the 5 though lol...

Bwcad1 · Post by **Bwcad1** » Thu Jan 11, 2007 10:15 am

i know this feeling.

front ball joints upper and lower 40bucks a piece
front wheel bearings 180 bucks a piece
rear wheel bearings 45 bucks a piece
catalytic converter 350 bucks installed
spark plugs 4 bucks each 6cyl
wires 30 bucks
distributer cap 30 bucks! WTF?
rotor 25 bucks
air filter 30 bucks
the list goes on and on!

CaptainPioneer · Post by **CaptainPioneer** » Thu Jan 11, 2007 10:19 am

y ea its just the part of owning a vehicle i guess lol... doesnt matter i still love m y truck

Darthness · Post by **Darthness** » Thu Jan 11, 2007 11:02 am

so far.. front wheel bearings: $200 x2

once i get the chance i'm probably going to get the exhaust redone.. but that'll be aftermarket. and not just exhaust tips, i want the full deal :-d
system: i stopped counting.

i'm kind of glad i didn't go with a dodge though.

and the wheel bearings are extremely simple, thank god for that... ill do the rear breaks next.. or atleast check them.

Bwcad1 · Post by **Bwcad1** » Thu Jan 11, 2007 11:09 am

are you paying for them to be installed? or are you getting the timkens that are 180 bucks keith?

Darthness · Post by **Darthness** » Thu Jan 11, 2007 11:11 am

simple simple simple to install. got the $180 ones from advanced vato

Bwcad1 · Post by **Bwcad1** » Thu Jan 11, 2007 11:35 am

o i know there simple i just wonderd if you were getting the cheaper ones and having them replaced

Tygur · Post by **Tygur** » Thu Jan 11, 2007 11:46 am

Dang and I thought my car had problems.

Mine is a 95, so its what, 11 or 12 years old, and it only has 81k miles but I've never had to replace any of the drivetrain parts.

I drive it hard too. But then I've only had it for about 7k miles, and the previous owner was a dealership owner, so it probably got taken care of.