Attention all members!
Have a cool ride? Then show it off on our website! All vehicles welcome!

running infinity kappas 6x9's w/out an amp

All speaker/sub woofer related questions.
kjc
Junior Member
Posts: 7
Joined: Tue Jan 09, 2007 8:00 pm

running infinity kappas 6x9's w/out an amp

Post by kjc »

i need help. :help:
i want to set up a new system witout going overkill.i keep getting different answers to my same questions.i have a 96 grand-am,(6x9@110 rms rear),and (4x6@60w rms front).i am going to use an alpine hu @ 18 rms.can i use infinity kappas here without an amp,and if i need an amp can someone reccomend a good one with the correct wattage needed.i'm also open for a suggestion on maybe different speakers but i do want quality but not overkill.thank you all and happy listening. :argh
Scarrell
Master of My Domain
Posts: 1479
Joined: Wed Oct 06, 2004 8:00 am
Location: Carmi, Illinois

Post by Scarrell »

you will be fine, but with a good amp, them speakers will perform better, give you better overall sound and clarity.. your best bet is a 4channel amp that does around 50-100rms x 4.
cargodz
Master of My Domain
Posts: 4771
Joined: Tue Jul 04, 2006 7:21 am
Location: NW Ohio
Contact:

Post by cargodz »

Although you may want to rethink amping the rear stage speakers and concentrate on the front stage... think about getting an adapter plate for the 4x6" to 5.25 and throw in a good set of coaxials or even better components and amp them... then you will not be overwhelmed by music from behind. Just my 2 cents :)
-Michael
http://www.teamcargodzinc.com :thumbsup
Hear It, See It, Feel It, Punch It!
And Proud Sponsor of
Team Wolf Pack Audio
Authorized Dealer
kjc
Junior Member
Posts: 7
Joined: Tue Jan 09, 2007 8:00 pm

adapter help

Post by kjc »

where would i find the correct adapter to install 5-1/4 components in a 96 grand-am in the doors,they call for 4x6's ? or should i make them?would mdf be ok?
brtnboarder3241
Senior Member
Posts: 837
Joined: Tue Jul 25, 2006 3:40 pm
Location: saint charles, IL
Contact:

Post by brtnboarder3241 »

:D lol
cargodz
Master of My Domain
Posts: 4771
Joined: Tue Jul 04, 2006 7:21 am
Location: NW Ohio
Contact:

Post by cargodz »

You are always better off to make them if you have the ability, as aftermarket speaker adapters are usually very flimsy and kinda a one size for a bunch of applications.
And Yeah, MDF is a great thing to use for building them... If you wanna get really into it... build them up and in (directional) and you can even glass/ paint or carpet ;)
-Michael
http://www.teamcargodzinc.com :thumbsup
Hear It, See It, Feel It, Punch It!
And Proud Sponsor of
Team Wolf Pack Audio
Authorized Dealer
Post Reply