Attention all members!
Have a cool ride? Then show it off on our website! All vehicles welcome!

BIOS Problem

Anything not related or doesnt fit another Forum.
solacedagony
Master of My Domain
Posts: 2171
Joined: Mon Nov 29, 2004 9:34 am
Location: Phillipsburg, NJ
Contact:

BIOS Problem

Post by solacedagony »

So I ordered a pretty new fan/heatsink to replace the extremely loud fan in my computer. I pulled everything out yesterday to get it mounted up and found that I don't have the original mounting bracket anymore, so I just cleaned everything up and reinstalled the old stuff. Plugged everything back in and turned it on. "Bad BIOS Checksum". So I download the BIOS, burn it to a CD and stick it in. It reads the BIOS and then says failed. Apparently I fried my BIOS completely. Gotta call up Asus today and see what the hell I can do now. I ordered a new motherboard since they're super cheap now (old 754-pin A64s) but I'm still going to try to get this fixed if it's not too expensive.
The thing that killed me about buying a new motherboard is that 90% of the 754-pin motherboards now use PCI Express. I just bought a new graphics card that's AGP since when I bought my board, there was no mainstream PCI Express stuff. I guess it pays to do some research before you buy new hardware 3 years later.
Done with my rant.
CaptainPioneer
Master of My Domain
Posts: 3389
Joined: Fri May 20, 2005 8:30 am
Location: Monroe, CT
Contact:

Post by CaptainPioneer »

Ok well ASUS is most definitely not going to do anything about that... Same deal happend with my brother, and unless you have some qualifications on PC Repair or installation they will say that you f'ed it up and its your fault...


Just out of curiosity, what kind of Heatsink did u get?
COR UNUM VIA UNA - Jay Chmura
solacedagony
Master of My Domain
Posts: 2171
Joined: Mon Nov 29, 2004 9:34 am
Location: Phillipsburg, NJ
Contact:

Post by solacedagony »

Yea, I wasn't angry at the mobo company or expecting them to fix it. It's 2-3 years old and these kinds of things happen when you DIY. I was just pissed in general that it happened, because I was careful.
I got a sweet heatsink/fan combo. http://www.newegg.com/Product/Product.a ... 6835118019
brtnboarder3241
Senior Member
Posts: 837
Joined: Tue Jul 25, 2006 3:40 pm
Location: saint charles, IL
Contact:

Post by brtnboarder3241 »

hey did u remove your video card? btw have u tried taking out the cmos battery?? if not unplug the computer from the wall and take it out wait a few seconds and put it back in..
CaptainPioneer
Master of My Domain
Posts: 3389
Joined: Fri May 20, 2005 8:30 am
Location: Monroe, CT
Contact:

Post by CaptainPioneer »

thats a nice one... i was looking at that one definitely but i got this one here...

http://www.newegg.com/Product/Product.a ... 6835106061

I love it
COR UNUM VIA UNA - Jay Chmura
brtnboarder3241
Senior Member
Posts: 837
Joined: Tue Jul 25, 2006 3:40 pm
Location: saint charles, IL
Contact:

Post by brtnboarder3241 »

CaptainPioneer
Master of My Domain
Posts: 3389
Joined: Fri May 20, 2005 8:30 am
Location: Monroe, CT
Contact:

Post by CaptainPioneer »

mine almost didnt clear the case cause that sucker stands tall but im telling u its soo quiet and it keeps my CPU nice and Cold even when im overclocked
COR UNUM VIA UNA - Jay Chmura
brtnboarder3241
Senior Member
Posts: 837
Joined: Tue Jul 25, 2006 3:40 pm
Location: saint charles, IL
Contact:

Post by brtnboarder3241 »

lol but after u clear the cmos/bios by taking out the battery for a little bit when u reboot go to bios by hitting f1, f2, or delete one of those should work and once you r into there fix everything like date and time...and then save it..let me kno if this does/doesnt work..ive had many problems while buidling my and my friends computers lol..thank god for my dad working at a place where i got some free lcd touchscreens...although they wernt nice to him in the end.. :)
CaptainPioneer
Master of My Domain
Posts: 3389
Joined: Fri May 20, 2005 8:30 am
Location: Monroe, CT
Contact:

Post by CaptainPioneer »

^^^ I completely forgot about that ... Take that battery out and then when you put it back in make sure that everything is completely secure... Check your connections to the board and what not...

On a similar note, My mother is the lead comp/ network engineering tech here at my workplace so she knows everything about that stuff too lol
COR UNUM VIA UNA - Jay Chmura
solacedagony
Master of My Domain
Posts: 2171
Joined: Mon Nov 29, 2004 9:34 am
Location: Phillipsburg, NJ
Contact:

Post by solacedagony »

All copper for me :)
I'm not sure if my heatsink is actually going to clear the top of the case. It's HUGE. If not, I'll trim the fins back a little, I don't care.
None of the those things will work because the computer won't even start the BIOS. I think it's physically damaged somehow.
Post Reply