Attention all members!
Have a cool ride? Then show it off on our website! All vehicles welcome!

i have a problem..rca's?

Post all your general car audio questions here.
Scarrell
Master of My Domain
Posts: 1479
Joined: Wed Oct 06, 2004 8:00 am
Location: Carmi, Illinois

Post by Scarrell »

does your deck have 3 sets of RCA's or anything(sorry if that is stated already, just skimmed through), maybe you have something switched around.. try hooking up a different HU, see if that will fix anything.
User avatar
William from NOLA
Posts: 5172
Joined: Tue Oct 05, 2004 8:00 am
Location: Metairie, LA
Contact:

Post by William from NOLA »

Oh! This just occured to me, make sure the rear RCA out is switched to something other than pass (I believe that is what it's called). Mine is under the Audio menu button when you hold that down for two seconds. I'm not sure if your's has the same button, but I'd check that.
A.K.A. megahurts4 :: Member since: July 19, 2002 :eek:
User avatar
lotas
Posts: 1112
Joined: Tue Oct 05, 2004 8:00 am
Location: WA

Post by lotas »

William from NOLA wrote:Oh! This just occured to me, make sure the rear RCA out is switched to something other than pass (I believe that is what it's called). Mine is under the Audio menu button when you hold that down for two seconds. I'm not sure if your's has the same button, but I'd check that.
yeah i switched the settings and it didnt make any difference. you know how the balance is 0-25 on each R and L on the HU? well its even at 20...

and i still cant figure out that constant noise coming out of the right tweeter...only the right tweeter does it.
Scarrell
Master of My Domain
Posts: 1479
Joined: Wed Oct 06, 2004 8:00 am
Location: Carmi, Illinois

Post by Scarrell »

i say.... if you go to the meet in Ohio..... we rip your car apart and install ALLLLLL the stuff all over again..
Mithrandir
Senior Member
Posts: 799
Joined: Wed Oct 13, 2004 10:30 am

Post by Mithrandir »

Lol if i go will u all donate stuff that isnt sony to my system :P
User avatar
lotas
Posts: 1112
Joined: Tue Oct 05, 2004 8:00 am
Location: WA

Post by lotas »

Scarrell wrote:i say.... if you go to the meet in Ohio..... we rip your car apart and install ALLLLLL the stuff all over again..
man that would be great but i live in WA :P
spkrman
Senior Member
Posts: 264
Joined: Thu Mar 03, 2005 9:00 am
Location: Chicago
Contact:

Post by spkrman »

any updates..?
User avatar
lotas
Posts: 1112
Joined: Tue Oct 05, 2004 8:00 am
Location: WA

Post by lotas »

no its still messed up, i have it balanced to 20 on one side.

im a bit hesitant doing this so here is my question

the right speaker is wayyy louder, therefore I think its getting more wattage than the left (but it might be the opposite, the left is getting less) but i dont think so becuase the speaker is incredibly loud at lowish volumes. Anyways, if it is getting more watts, its getting more heat. When you use the balance on a HU, is that (in the end) actually going to send the speaker less heat?

So basically does the balance tell the amp to send less output to one of the sides, or is it something more simple than that?

\where im going with this is although the speakers are now balanced, the right one might be getting too much constant wattage.

i dunno, just trying to think of anything that could be damaging until i do my false floor project.
thanks
Ryan from Ohio
Posts: 13308
Joined: Fri Mar 17, 2000 12:00 pm
Contact:

Post by Ryan from Ohio »

This is starting to get really confusing. It may be time to take it into a shop and let them have a quick peak at it.

Never know, it may be just something that nobody can think of off hand, or something you may not have mentioned. Often times if they fix it under a few minutes they let ya walk for free ;)
-Ryan
www.caraudiocentral.net - Your #1 Car Audio Resource on the Net!
spkrman
Senior Member
Posts: 264
Joined: Thu Mar 03, 2005 9:00 am
Location: Chicago
Contact:

Post by spkrman »

Did you ever try hooking up some speakers to the amp outside of the doors? Just some test speakers... so you'll know if its a speaker wire issue somewhere in the runs.
Post Reply