2 AA Assasin 10" suggestions

CaptainPioneer · Post by **CaptainPioneer** » Fri Jul 07, 2006 6:54 am

I was on the site and trying to build a system for a friend... i suggested 2 10" assasins in a sealed box, Site says .7 cuft reccomended at 200w but rms says 350w... any better suggestions to go with... I like the idea of 2 10" AA's though... also I was thinking maybe a Kicker Amp to go with it possibly, or somethign that will put out about 200 to 400w per channel

CaptainPioneer · Post by **CaptainPioneer** » Fri Jul 07, 2006 7:32 am

I was thinking possibly a Kicker 650.4 class a/b

http://cgi.ebay.com/KICKER-KX650-4-CAR- ... dZViewItem

MobileAudio219 · Post by **MobileAudio219** » Fri Jul 07, 2006 8:56 am

Kicker kx 400.1 or kicker kx600.1, both put out their rated power at 2 ohms, I believe the assasins are single 4ohm so there you go.

CaptainPioneer · Post by **CaptainPioneer** » Fri Jul 07, 2006 9:52 am

Ill give him that option what do u think of the Ebay link i sent

brent · Post by **brent** » Fri Jul 07, 2006 11:11 am

MobileAudio219 wrote:Kicker kx 400.1 or kicker kx600.1, both put out their rated power at 2 ohms, I believe the assasins are single 4ohm so there you go.

I have a 600.1. They exceed rated at 2ohms. Never ran it at 4ohms, does anyone know if it will do rated at 4ohms?

High Society · Post by **High Society** » Fri Jul 07, 2006 12:01 pm

Yes it will do rated at 4 ohms.

CaptainPioneer · Post by **CaptainPioneer** » Fri Jul 07, 2006 12:03 pm

wonderful he is just looking for some crisp sounding bass nothing outta control, so i figured that AA would be a good idea

brent · Post by **brent** » Fri Jul 07, 2006 12:52 pm

High Society wrote:Yes it will do rated at 4 ohms.

Sweet, I may end up running ine at 4 ohms depending on what I decide to do with my setup now.

two4fifteen · Post by **two4fifteen** » Fri Jul 07, 2006 1:49 pm

brent wrote:Sweet, I may end up running ine at 4 ohms depending on what I decide to do with my setup now.

wait... do you mean will it do 600 at 4 ohm?

MobileAudio219 · Post by **MobileAudio219** » Sat Jul 08, 2006 6:12 am

the kx600.1 does 600 @ 2 ohms, 300 @ 4 ohms.