midbass...

two4fifteen · Post by **two4fifteen** » Mon Jun 19, 2006 3:18 pm

i just dont know... jl 6w0?...eD Eu-700?....kicker SSMB6?.....i dont know anymore

i wish i could hear them

smoker · Post by **smoker** » Mon Jun 19, 2006 4:13 pm

or these....35 each

http://www.ascendantaudio.com/poly_6.5_page.html

two4fifteen · Post by **two4fifteen** » Mon Jun 19, 2006 4:17 pm

how about these? only 60 bucks for some cdt 8" drivers.

http://www.woofersetc.com/index.cfm?fus ... ct_ID=3340

two4fifteen · Post by **two4fifteen** » Thu Jun 22, 2006 5:36 pm

okay, new plan. moneys finally tight because of my recent car troubles, and im now thinking of using my ol kicker kx350.4 to power some kicker ssmb8's (for 130 shipped) or some of dd's 6.5 mids. would these work well in an IB in my rear deck crossed over between 200-80 Hz? this would save me from buying an amp and crossover. i could use my amps low pass at 200 Hz and my hu's highpass at 80.

p.s. dd emailed me back. $97 for those 6.5" drivers.

CaptainPioneer · Post by **CaptainPioneer** » Fri Jun 23, 2006 4:43 am

97 for the pair?

two4fifteen · Post by **two4fifteen** » Fri Jun 23, 2006 5:14 am

CaptainPioneer wrote:97 for the pair?

see, i think thats the price per driver, but im emailing them back just to make sure. ill let you know when i get a response

CaptainPioneer · Post by **CaptainPioneer** » Fri Jun 23, 2006 5:37 am

sounds good

suleman36 · Post by **suleman36** » Mon Oct 02, 2006 7:39 pm

CDT M6 midbass drivers hands down.

solacedagony · Post by **solacedagony** » Tue Oct 03, 2006 3:51 am

You could try the Extremis or go with a 7" or 8" Dayton Ref or Peerless HDS/SLS driver.

Edit: I don't have time to read through the thread, but I read the first page and you were talking about midbass drivers in the rear. That can pull your soundstage towards the back, but shouldn't mess with your imaging.

two4fifteen · Post by **two4fifteen** » Tue Oct 03, 2006 4:42 am

this is an old thread.

but i will be adding a pair of ssmb6 drivers in my front doors with a zx350.2 and a kx2 crossover to bandpass, as well as proper deadening. this should happen in the next few weeks or so, since i just started work again yesterday.

oh, and while reaing above, i did find out those dd drivers were 97 EACH