GlassWolf or Jonathan / enclosure for subs

JeremyC · Post by **JeremyC** » Sun May 28, 2006 3:09 pm

There is a post on here that give a good run down of subsonic filters and how to set them. It even list a freq that if your box is tuned below you can get away without running one. I beleive the freq was in the low 30s (32 or so) but I don't rember right off hand.

If you can find it, it will answer all your questions.

I know geolemon wrote part of it, but I can't find it. Hopefully someone knows the thread I am talking about.

If not, 25 shouldn't be to bad. I like to set them a little closer, but your tuning the box pretty low, so you should be ok.

suleman36 · Post by **suleman36** » Sun May 28, 2006 3:23 pm

Im not sure how it will sound in a sedan like my camry according to JL specs but most people here say go by JL specs and all. They say 1.5 net @ 32hz for 2 10w6v2's with dual slot ports. / .75 net per sub

Originally i thought that was way to small but everyone here says go by JL with the exception of one person. I mean dont get me wrong. I love to save space and go the smaller route if its going to sound optimum at that size.

swimmerdude · Post by **swimmerdude** » Sun May 28, 2006 3:36 pm

JL should know their products and how they perform. If they recommend it, it should be perfect for it. If you have doubts, call them up and ask to talk to a technical person and see what they have to say.

suleman36 · Post by **suleman36** » Sun May 28, 2006 3:38 pm

Yeah i called up JL and spoke to Hector Yanaz. He said that i should follow JL specs that came with the subwoofer. No need to go larger according to him.

So 1.5 cuft net @ 32hz with a preset subsonic filter at 25hz

I can get this modified if i pay arc audio money.

suleman36 · Post by **suleman36** » Sun May 28, 2006 3:49 pm

I noticed on some sites that sell the 10w6v2. They recommend from .75-1.25 cuft but on the pdf it only mentions .75

http://www.woofersetc.com/index.cfm?fus ... ct_ID=2059

and

http://www.onlinecarstereo.com/CarAudio ... ctID=12513

suleman36 · Post by **suleman36** » Wed May 31, 2006 11:33 am

Anyone else here have a box built by phil at http://www.woodlawncabinetry.com ?

He's going to build it to 2 cuft net @ 32hz

Look forward to this box hes going to build me.

Bwcad1 · Post by **Bwcad1** » Wed May 31, 2006 11:40 am

he seems to make extremly nice enclousures the only gripe i have is he uses 1/2" mdf for port walls. claiming it to be for weight reduction. ehh dont thinkg .25 inches of mdf will weight that much but i guess its not a huge deal.

suleman36 · Post by **suleman36** » Wed May 31, 2006 2:31 pm

yes, i just read it on his website :
http://www.woodlawncabinetry.com/Enclos ... tails.html

Ryan from Ohio · Post by **Ryan from Ohio** » Wed May 31, 2006 6:09 pm

He makes a lot of enclsures and seems to be a nice fellow.

People here build boxes also

And we do it quite competitively!

I killed the spelling on that didnt I?

suleman36 · Post by **suleman36** » Wed May 31, 2006 7:31 pm

Ryan, who else here builds boxes ?