Im makin a box again

Mithrandir · Post by **Mithrandir** » Wed Jan 05, 2005 1:39 pm

Im plan on makin a large sealed box, so i dont have to get a better amp for my subs. They are infinity reference at the moment and only getting half their wattage in a 0.8 cubic foot box (ideal box for those subs) Would a 1.5 cubic foot sealed box let em work to their maximum potential without over excurting?

Justin from Detroit1 · Wed Jan 05, 2005 2:10 pm

You do know that you aren't supposed to let your subs bottom out right?

Mithrandir · Post by **Mithrandir** » Wed Jan 05, 2005 2:18 pm

their i fixed it

Mithrandir · Post by **Mithrandir** » Wed Jan 05, 2005 2:32 pm

here are my measurements

Height - 14
Width - 32
Depth - 16

Front - 14 x 32
Back - 14 x 32
Top - 14 1/2 x 32
Bottom - 14 1/2 x 32
Sides - 12 1/2 x 14 1/2

It will be about 1.5 cubic feet per chamber, hopefully that will be enough for em to work to their full potential

Mithrandir · Post by **Mithrandir** » Wed Jan 05, 2005 6:11 pm

ok i went to home depot and this old dude cut my wood, some is off by 1/16, will that matter?

Scarrell · Post by **Scarrell** » Wed Jan 05, 2005 9:40 pm

i am not sure on sealed boxes about if the measurement is off it will effect it greatly, but i do know it will on tuned boxes...

Justin from Detroit1 · Wed Jan 05, 2005 9:50 pm

Once you start putting it together you will see. Unless all of the cuts are perfect, you will have gaps.

Mithrandir · Post by **Mithrandir** » Thu Jan 06, 2005 2:24 am

then im gonna return the wood to home depot and flip shit on the guy

Imma straight kill those mother fckers if they dont give me my money back.

Scarrell · Post by **Scarrell** » Thu Jan 06, 2005 3:14 am

when you get wood cut at a place you always have them measure it and look for yourself...... i dont know if they will take it back or not since you have taken it home... but give it a try i guess...

Justin from Detroit1 · Thu Jan 06, 2005 5:27 am

If they are anything like Lowes, they will take it back.