Attention all members!
Have a cool ride? Then show it off on our website! All vehicles welcome!

Elevation Audio vs. Elemental Designs [Closed]

Post all your general car audio questions here.
Ezekiel81923
Junior Member
Posts: 3
Joined: Wed Feb 22, 2006 11:28 am

Elevation Audio vs. Elemental Designs [Closed]

Post by Ezekiel81923 »

Hey fellas, new to the forum so i thought id say hey first off...not so new to car audio though.

But i am new to Elevation Audio, and when someone brought the name over to my home forum, SiN, i thought id come over here to get some answers. I havent heard anything of theirs yet, but i might be in the market for a new setup. I currently have an orion hcca 250r powering an eD 15A ported. Im keeping the amp, no question...

i was wondering though, how the newer Elevation Pro 12's (due in march i hear?) would stack up against the 15A. The 15A doesnt lack sound quality or pressure levels, i just think going to a dual setup would look nicer, less out of place, and im always wanting to try something new.

I have 800-1000w at 1 ohm so im sure i could power them fine, im just concerned the SQ may not live up to the standard the 15A has set for me. Id also like it to be a little louder too, but if nothing else at least the same.

Who has any idea? Obviously the newer model isnt out yet, but can anyone tell me about the current Pro's?
sinister audio
Master of My Domain
Posts: 2562
Joined: Sat Mar 19, 2005 9:00 am
Location: Watertown, South Dakota
Contact:

Post by sinister audio »

i like the older pros but i dont know how the new ones will do. id wait a while to see if they have any problems with them before you buy because they have had some troubles before. have you thought about something from bravox or arc or RE?
smoker
Master of My Domain
Posts: 4126
Joined: Tue Mar 15, 2005 9:00 am
Location: florence, ky
Contact:

Post by smoker »

here we go again............i havent had any problems with the pros and think they sound fantastic....that being said i have no experience with elemental design at all.......
High Society
Master of My Domain
Posts: 2473
Joined: Sun Jan 23, 2005 11:59 am
Location: Philippines
Contact:

Post by High Society »

Isn't the EDa thier flagship right? The flat cone style? I know Ryan from Ohio, call him Ryan for short :) had huge problems with his Ed sub, can't remember the model number eDK? Anyway, I'm sure since you've been over at SIN, you know all about RE, Adire. Right now I have an Elevation audio Execution, don't have everything installed, but it's a beefy sub I'll tell you that.

is your ed in a ported box? Cuz I think the Pro's were more designed for sealed boxes? Unless thats only the comps not sure. Justin from Det. could tell you about the pros, he had them compared to his old XXX's
♠ Mateo ♠

80 pounds of Titanium
Proud Member of Team Wolfpack Audio
High Society
Master of My Domain
Posts: 2473
Joined: Sun Jan 23, 2005 11:59 am
Location: Philippines
Contact:

Post by High Society »

http://www.caraudiocentral.net/forums/s ... php?t=3396

this is my thread with pics of the X
♠ Mateo ♠

80 pounds of Titanium
Proud Member of Team Wolfpack Audio
Justin from Detroit1
Junior Member
Posts: 0
Joined: Wed Dec 31, 1969 6:00 pm
Location: Detroit

Post by Justin from Detroit1 »

Yup, here we go again is right, Terry. Sinister is the only person to ever have a problem with the Pro subwoofer. I don't know how he had a problem with them, but somehow he did. The Pro's are excellent subwoofers. They do get quite loud, and actually sound very nice in doing so. The pair I have were receiving around 400w RMS, and in a small sealed enclosure I managed to hit a 142.3.
kevinberry1
Senior Member
Posts: 638
Joined: Fri Feb 18, 2005 7:21 pm
Location: Omaha, NE

Post by kevinberry1 »

Justin from Detroit wrote:Yup, here we go again is right, Terry. Sinister is the only person to ever have a problem with the Pro subwoofer. I don't know how he had a problem with them, but somehow he did. The Pro's are excellent subwoofers. They do get quite loud, and actually sound very nice in doing so. The pair I have were receiving around 400w RMS, and in a small sealed enclosure I managed to hit a 142.3.
Do you remember off hand how many cubic feet each side of the enclosure was? I think Elevation recommends .8. Just curious because I'm building a box for one.

The pro is pretty beastly as well, not as big as the Excursion, but very large. I can't wait to hear how mine sounds with 800 watts...
Bwcad1
Master of My Domain
Posts: 9312
Joined: Wed Aug 03, 2005 11:00 am
Location: Ohio

Post by Bwcad1 »

the new pros are just as good as the old ones i dont see much diffrence...
ImageImage


ΜΟΛΩΝ ΛΑΒΕ
High Society
Master of My Domain
Posts: 2473
Joined: Sun Jan 23, 2005 11:59 am
Location: Philippines
Contact:

Post by High Society »

Excursion,
Kevin :nono

It's called an Execution :fing02:
♠ Mateo ♠

80 pounds of Titanium
Proud Member of Team Wolfpack Audio
Justin from Detroit1
Junior Member
Posts: 0
Joined: Wed Dec 31, 1969 6:00 pm
Location: Detroit

Post by Justin from Detroit1 »

kevinberry1 wrote:Do you remember off hand how many cubic feet each side of the enclosure was? I think Elevation recommends .8. Just curious because I'm building a box for one.
The pro is pretty beastly as well, not as big as the Excursion, but very large. I can't wait to hear how mine sounds with 800 watts...

After displacement, it was almost exactly .8^ft, the enclosure was built for the Pro's. One with 800w should sound excellent.
Locked