dammit, help me find this...

Darthness · Post by **Darthness** » Tue Feb 21, 2006 7:42 pm

smoker wrote:dude your not gonna get over that hole are you?

I was joking... i forgot what i was goign to cut it to though. it doesn't matter now, can just measure.

but uhh.. just for the record, my jl sub had mounting holes for the 10, 12 and 14" w1v2 subwoofers. :P

Justin from Detroit1 · Tue Feb 21, 2006 7:45 pm

OK, for some reason, people don't sem to pick up on this...

Open your subwoofer box. Now take out the subwoofer. See that ring of cardboard that you just took the subwoofer out of? Trace that onto your enclosure.

Bwcad1 · Post by **Bwcad1** » Tue Feb 21, 2006 8:28 pm

lol i was wondering if anybody realized that... the guy who does my graphics is the one who is working on the new elevation stuff

Darthness · Post by **Darthness** » Wed Feb 22, 2006 3:37 am

i thought of that justin......

Ryan from Ohio · Post by **Ryan from Ohio** » Wed Feb 22, 2006 4:09 am

I can probably get ANL fuses for like $3 each

Wholsale house carries them dude! Audiopipe.

The one local store (The Andersons) carries WH products and has audiopipe stuff. Its extremely cheap in price and I havent had a problem with it yet.

http://www.dragondistributing.com/audiopipefuse.htm

Bwcad1 · Post by **Bwcad1** » Wed Feb 22, 2006 5:04 am

i dont see a 400 amp fuse there ryan...

smoker · Post by **smoker** » Wed Feb 22, 2006 5:23 am

Darthness wrote:I was joking... i forgot what i was goign to cut it to though. it doesn't matter now, can just measure.
but uhh.. just for the record, my jl sub had mounting holes for the 10, 12 and 14" w1v2 subwoofers. :P

one of my customers recently made his own box and just flipped the sub upside down and traced around the outer edge.....yup it fell in....but rather than rebuild it he was crafty enough to just move it over a little and hold it in there with 2 screws.....he actually stopped by to see why it sounded so bad......

Bwcad1 · Post by **Bwcad1** » Wed Feb 22, 2006 5:30 am

devin had the same issue with some guy

Bwcad1 · Post by **Bwcad1** » Wed Feb 22, 2006 5:49 am

honestly justin i dont think you will ever blow a 300 amp fuse on 340 watts hell my MM4000.1 pulls 280 amps and i run it on a 60 amp fuse in meca. right now for daily its running on two runs of 1/0 on 2 100 amp fuses. i bet a good a good 10 bucks you throw that 300amp in there and it wont blow. also my mm2000.1 was supposed to have a 180 amp fuse but i ran it on a 100 all day everyday and it never blew.

Ryan from Ohio · Post by **Ryan from Ohio** » Wed Feb 22, 2006 7:34 am

Bwcad1 wrote:i dont see a 400 amp fuse there ryan...

http://www.dragondistributing.com/audiopipefuse.htm

Look under the ANL Fuses section.

Part no: ANL-400