New, Redone, Project :)

joeyc · Post by **joeyc** » Mon Feb 13, 2006 8:40 pm

I decided to redo the amp rack under my rear seat. Some of you know i did the tape/foil fiberglass method to make a form to mount the amp. Turns out it was going to be a little smaller than I needed, DOH!! On the bright side, the first go at it was some good experience, which led to a very satisfactory second attempt. I built a three sided frame out of 3/8" baltic birch plywood, formed to the floor of course and spaced about an inch from the front and side of the seat. I layed that over a taped off floor, then taped the bottom of the form to the floor. Then foiled over it for easier removal. I glassed the living sh#t out of it after that, I think I used about 48 oz of glass and many layers of cloth(glassing it up the sides of the wood). I will post pictures of this along with my box tomorrow night!! Now all I need is an amp for it!! :)

Post by **GlassWolf** » Mon Feb 13, 2006 8:51 pm

did you post pics of that job on carstereo.com?
I swear I saw pictures of this somewhere.. or someone else did the same exact thing somewhere.. with the fiberglass tub and all.

joeyc · Post by **joeyc** » Mon Feb 13, 2006 8:53 pm

No, wasn't me. this is the first time i've done something like this, other than my first attempt :)

William from NOLA · Post by **William from NOLA** » Mon Feb 13, 2006 8:59 pm

So THAT's why you haven't been trying to beat the arcade games lately :)

joeyc · Post by **joeyc** » Mon Feb 13, 2006 9:02 pm

LOL, I never played those anyway. Only took me one time each to get the high score.