Attention all members!
Have a cool ride? Then show it off on our website! All vehicles welcome!
Have a cool ride? Then show it off on our website! All vehicles welcome!
Rear fill or no rear fill?
Rear fill or no rear fill?
Replacing the factory setup in my SRT4 (umm... Neon), and debating whether to bother w/rear fill.
up front - Diamond Audio s600a HEXs powered by JL 300/2, Eclipse 8455 HU,
Sub is sealed Kicker s10l5 pwrd by kx250.2 (really wanted to put in the JL W7 10", but need to keep the car light).
Looking for SQ primarily.
Better to leave it w/o the rears hooked up?
up front - Diamond Audio s600a HEXs powered by JL 300/2, Eclipse 8455 HU,
Sub is sealed Kicker s10l5 pwrd by kx250.2 (really wanted to put in the JL W7 10", but need to keep the car light).
Looking for SQ primarily.
Better to leave it w/o the rears hooked up?
NO rear fill if looking for SQ. Keep a solid front stage and there will be no reason for rear fill.
IASCA Certified SQ Judge
USACi Certified SQ Judge
MECA Certified SQ Judge
2010 USACi Spring Break Jam Modified SQ Champion
Moderator for https://www.facebook.com/groups/524841581331183/
CVD Audio Sales and Acquisitions Team
http://www.cvdaudio.com
USACi Certified SQ Judge
MECA Certified SQ Judge
2010 USACi Spring Break Jam Modified SQ Champion
Moderator for https://www.facebook.com/groups/524841581331183/
CVD Audio Sales and Acquisitions Team
http://www.cvdaudio.com
SRT..you might look into the JL10w3 then, light, efficient and a fairly decent sq sub. Or you can do what I did and get a Focal sub. the Access line isn't that bad and costs about the same as a 10w3
IASCA Certified SQ Judge
USACi Certified SQ Judge
MECA Certified SQ Judge
2010 USACi Spring Break Jam Modified SQ Champion
Moderator for https://www.facebook.com/groups/524841581331183/
CVD Audio Sales and Acquisitions Team
http://www.cvdaudio.com
USACi Certified SQ Judge
MECA Certified SQ Judge
2010 USACi Spring Break Jam Modified SQ Champion
Moderator for https://www.facebook.com/groups/524841581331183/
CVD Audio Sales and Acquisitions Team
http://www.cvdaudio.com
Wow... you guys reply fast (new to this forum)!
I chose that sub due to size/weight/elcheapo factor and I figured if it really sucked I'd eventually replace it. Crossing it over @~60Hz just to add some decent bass, not to win awards. Are they really that bad sounding and problematic?
JeremyC - When you say '3 way,' are you referring to sub/mid/high or do you mean triamping in front (low/mid/high + sub in back)?
Diamond audio (tech desk) suggested I add a 2nd tweet in the dash and use a passive xover @10Khz to bring the soundstage up a tad. Doubt I'll do that.
I chose that sub due to size/weight/elcheapo factor and I figured if it really sucked I'd eventually replace it. Crossing it over @~60Hz just to add some decent bass, not to win awards. Are they really that bad sounding and problematic?
JeremyC - When you say '3 way,' are you referring to sub/mid/high or do you mean triamping in front (low/mid/high + sub in back)?
Diamond audio (tech desk) suggested I add a 2nd tweet in the dash and use a passive xover @10Khz to bring the soundstage up a tad. Doubt I'll do that.

