Attention all members!
Have a cool ride? Then show it off on our website! All vehicles welcome!

Is it nice SQ system?????

Post all your general car audio questions here.
User avatar
OnYrMrk
Posts: 2864
Joined: Wed Oct 26, 2005 11:00 am
Location: Moore, Oklahoma
Contact:

Post by OnYrMrk »

lotas wrote:10g wire going to speakers? Isn't that a little overkill? Heck I use 12g going to my subs and that seems big.

It probably is, but I am a firm believer in giving things room to perform, rather than squelching the life from them. I probably wouldn't have gone below 12g, but then again...I don't really need 0 g power and ground either. Could have probably done fine with 2 g.

Yea it is alot, but I have 8 g going to my sub and towers at home.

goes with the old addage, more is better, and it give the system room to grow.
IASCA Certified SQ Judge
USACi Certified SQ Judge
MECA Certified SQ Judge
2010 USACi Spring Break Jam Modified SQ Champion
Moderator for https://www.facebook.com/groups/524841581331183/
CVD Audio Sales and Acquisitions Team
http://www.cvdaudio.com
User avatar
lotas
Posts: 1112
Joined: Tue Oct 05, 2004 8:00 am
Location: WA

Post by lotas »

OnYrMrk wrote:It probably is, but I am a firm believer in giving things room to perform, rather than squelching the life from them. I probably wouldn't have gone below 12g, but then again...I don't really need 0 g power and ground either. Could have probably done fine with 2 g.

Yea it is alot, but I have 8 g going to my sub and towers at home.

goes with the old addage, more is better, and it give the system room to grow.
I agree it gives your system room to grow, however I only agree with that in terms of power/ground wire, I don't see how that applies to speaker wire.

I guess it's not use to argue about something like this, people have different ways of doing things. Cheers. :cheers:
User avatar
OnYrMrk
Posts: 2864
Joined: Wed Oct 26, 2005 11:00 am
Location: Moore, Oklahoma
Contact:

Post by OnYrMrk »

I agree...I tend to go overboard when it comes to my music...home or car. I didn't take offense to anything you wrote Brendan. :cheers: back at ya
IASCA Certified SQ Judge
USACi Certified SQ Judge
MECA Certified SQ Judge
2010 USACi Spring Break Jam Modified SQ Champion
Moderator for https://www.facebook.com/groups/524841581331183/
CVD Audio Sales and Acquisitions Team
http://www.cvdaudio.com
rsjaurr
Member
Posts: 31
Joined: Sat Nov 12, 2005 7:32 am

Post by rsjaurr »

As far as your system goes, if your focus is SQ, it may prove to you to be as hard to find as the Holy Grail. If you haven't purchased anything yet, what is your budget?

There are lots of good name brands & bad ones... but the main difference is the cost of having to pay more for a certain name brand among the good ones. I have friends dumping tons of money on audio gear because they think the more they spend the better. Just know that it isn't nessesarily so...

What do you have available locally? Or are you buying online? Are you open to RAW DIY drivers (by far the best value in speaker selection, and there is more info about what you're buying available, unlike Car Audio brands)

Finally, I would make your speaker selection carefully since this will make or break the tonality of your system.

Thanx guys for overwhelming response.
My budget for cabling [includes 4G power kit for amp,rca cables for 5-ch amp and 66 mt spk wire for 4 door spk abd one subw] is aroubd $100.Obviusly if i can find a better kit with lower prices i will go for it.

Locally we have here JBL power kit for $55 and audison [all i need] for $124.
I am getting Monster power kit for $40 from onlinecarstereo,monster 16G spk wire 100' spool from and 3 rca cables each 16' long for $40 from hookedontronics.

I checked knukonceptz wires and they seem to be cheaper than monster.not sure about quality though.

My total budget is $800.
rsjaurr
Member
Posts: 31
Joined: Sat Nov 12, 2005 7:32 am

Post by rsjaurr »

Can i use 16g spk wire for driving subw as well?
User avatar
OnYrMrk
Posts: 2864
Joined: Wed Oct 26, 2005 11:00 am
Location: Moore, Oklahoma
Contact:

Post by OnYrMrk »

according to some here you can, I tend to over-engineer though.
IASCA Certified SQ Judge
USACi Certified SQ Judge
MECA Certified SQ Judge
2010 USACi Spring Break Jam Modified SQ Champion
Moderator for https://www.facebook.com/groups/524841581331183/
CVD Audio Sales and Acquisitions Team
http://www.cvdaudio.com
Justin from Detroit1
Junior Member
Posts: 0
Joined: Wed Dec 31, 1969 6:00 pm
Location: Detroit

Post by Justin from Detroit1 »

We have told you MULTIPLE times in this thread that the build quality of KnuKonceptz wiring is excellent. I run two competition vehicles, an SQ and an SPL, and I use KnuKonceptz wiring in both.
rsjaurr
Member
Posts: 31
Joined: Sat Nov 12, 2005 7:32 am

Post by rsjaurr »

Justin from Detroit wrote:We have told you MULTIPLE times in this thread that the build quality of KnuKonceptz wiring is excellent. I run two competition vehicles, an SQ and an SPL, and I use KnuKonceptz wiring in both.

Then plz guide me what all to choose from there.Also i cant see how can i calculate shipping charges as my relative lives in Canton,detroit.
Their spk cables r really costly.I need around 60 mt.
User avatar
OnYrMrk
Posts: 2864
Joined: Wed Oct 26, 2005 11:00 am
Location: Moore, Oklahoma
Contact:

Post by OnYrMrk »

Honestly, I would call KnuKoncepts. Their wire is less expensive, the build quality is there also. I don't know prices, but figure around 40%-50% less than MC.

16g is good for your components and coaxes, but I would seriously think about going to a 12g for your subs. Generally you will only need about 20 ft total for subwoofer wire. If you plan on them being in the trunk. Maybe less depending on where you have your amps mounted.

Just my opinion. I would like for you to get the quality of wire you deserve. good luck
IASCA Certified SQ Judge
USACi Certified SQ Judge
MECA Certified SQ Judge
2010 USACi Spring Break Jam Modified SQ Champion
Moderator for https://www.facebook.com/groups/524841581331183/
CVD Audio Sales and Acquisitions Team
http://www.cvdaudio.com
MrSo0h0o
Senior Member
Posts: 569
Joined: Wed Oct 13, 2004 7:58 pm
Location: Whitestone, NY

Post by MrSo0h0o »

^^ hes right.. it all depends where your amps are mounted.. how big your car is.. how many speakers you are running wire to.. figure out placement of your speakers and amps first.. or if u want to just guesstimate, i would say at least 30ft(16g is fine) for front speakers, at least 10ft(12g) for sub(s), etc.
Post Reply