L7 or CVR

ridr4lif · Post by **ridr4lif** » Sun Sep 25, 2005 7:27 pm

http://www.xtant.com/html/techSupport/enclosures.cfm

check that out too....lots of good info

tedd

pbstud1085 · Post by **pbstud1085** » Sun Sep 25, 2005 7:27 pm

what each kind does, how to tune, how to build, what to use, everything in general that i need to know

ridr4lif · Post by **ridr4lif** » Sun Sep 25, 2005 7:30 pm

check out the link above

tedd

pbstud1085 · Post by **pbstud1085** » Sun Sep 25, 2005 7:30 pm

k thx

High Society · Post by **High Society** » Sun Sep 25, 2005 7:33 pm

http://www.bcae1.com/

Check that place out. Best car audio place ever....besides this place :)

pbstud1085 · Post by **pbstud1085** » Sun Sep 25, 2005 7:48 pm

is acrylic going to work the same as wood would? performance wise i mean

oXpToWnXo · Post by **oXpToWnXo** » Sun Sep 25, 2005 7:49 pm

i dotn know...it might but im not sure.....i wuld have tyo see or test it

High Society · Post by **High Society** » Sun Sep 25, 2005 8:05 pm

is acrylic going to work the same as wood would? performance wise i mean

And pay $15bucks a sqft, NO. Stick with 3/4MDF from homedep, for like 20 bucks.
Do it your self, it's really easy, I made one!

High Society · Post by **High Society** » Sun Sep 25, 2005 8:06 pm

Do it your self, it's really easy, I made one!

I quote myself. Other people build there own boxes here. They can tell you how easy it is.

Ryan from Ohio · Post by **Ryan from Ohio** » Mon Sep 26, 2005 3:32 am

pbstud1085 wrote:is acrylic going to work the same as wood would? performance wise i mean

Yes and no.

Its a solid material thats not porous. Its not as dense as MDF so you will need a thicker piece vs. the MDF.

So instead of 3/4 MDF I would advise 1" Polycarbonate. Acrylic is to brittle, plexi glass is to weak of a formula.