Attention all members!
Have a cool ride? Then show it off on our website! All vehicles welcome!
Have a cool ride? Then show it off on our website! All vehicles welcome!
Amp for an RE 10...
- Blitzzzkrieg
- Posts: 336
- Joined: Tue Oct 05, 2004 4:00 am
- Location: Charleston, SC
Amp for an RE 10...
Im putting a single RE 10 in my reg cab S10 and wanna know what would be the cheapest amp solution...it will be in the rec. sized ported enclosure (1 cube) site says 175RMS and 250MAX....thing that makes his hard is that they are dual 4 so i need an amp that does 150-200 at 2 ohms...not easy to find....anyone got some suggestions? think i could throw 300 on it in a sealed box?
-
Justin from Detroit1
- Junior Member
- Posts: 0
- Joined: Wed Dec 31, 1969 6:00 pm
- Location: Detroit
- Blitzzzkrieg
- Posts: 336
- Joined: Tue Oct 05, 2004 4:00 am
- Location: Charleston, SC
-
Dustin from Huntsville
- Master of My Domain
- Posts: 1656
- Joined: Tue Oct 05, 2004 4:00 am
- Location: Huntsville, AL
- MobileAudio219
- Master of My Domain
- Posts: 4919
- Joined: Thu Oct 07, 2004 4:00 am
- Location: Sullivan Missouri
Sound domain has the JBL BP 150.1 on sale for $74.95, its renewed, but who cares? They also have the JBL BP 300.1 for $139.95, it to is renewed. I would get the 150.1, but thats just me. JBL makes pretty good amps, I had the BP 600.1 and it never gave me any problems.
1995 Ford Explorer Sport, 4.0, Auto, 2dr, 2wd!
JVC KD-S100, PPI 356c's ,Hifonics ZXI 6410, 10" AB DX
Like project build threads? Have one of your own? Post it here!
www.projectcarforum.com
[SIGPIC][/SIGPIC]
JVC KD-S100, PPI 356c's ,Hifonics ZXI 6410, 10" AB DX
Like project build threads? Have one of your own? Post it here!
www.projectcarforum.com
[SIGPIC][/SIGPIC]
-
6three6mafia6
- Senior Member
- Posts: 211
- Joined: Wed Oct 06, 2004 11:00 am
WHOA man you do NOT need to spend 200$ on such little power, you should spend under 100$ for something like that if you look, this might work
http://www.crutchfield.com/S-pzQoZnT9Qb2/cgi-bin/ProdView.asp?g=130&I=500MRDM301
i THINK you can wire this without going to 2 ohms, if you can it will give 175+ and it will sound very clean, i had a mrv-t 420, very clean sound, like i said im still not sure how mono amps come, ive heard they come like 2 channel amps, and ive heard they only come with one + and - so you got to check on that, if it works go to ebay.
http://www.crutchfield.com/S-pzQoZnT9Qb2/cgi-bin/ProdView.asp?g=130&I=500MRDM301
i THINK you can wire this without going to 2 ohms, if you can it will give 175+ and it will sound very clean, i had a mrv-t 420, very clean sound, like i said im still not sure how mono amps come, ive heard they come like 2 channel amps, and ive heard they only come with one + and - so you got to check on that, if it works go to ebay.
-
Ryan from Ohio
- Posts: 13308
- Joined: Fri Mar 17, 2000 12:00 pm
- Contact:
WHOA man you do NOT need to spend 200$ on such little power, you should spend under 100$ for something like that if you look, this might work
:dumb_ass:
Alpine MRD-M301 $329.99
What were you thinking
BTW Im joking.
-Ryan
www.caraudiocentral.net - Your #1 Car Audio Resource on the Net!
www.caraudiocentral.net - Your #1 Car Audio Resource on the Net!
- Blitzzzkrieg
- Posts: 336
- Joined: Tue Oct 05, 2004 4:00 am
- Location: Charleston, SC
-
6three6mafia6
- Senior Member
- Posts: 211
- Joined: Wed Oct 06, 2004 11:00 am