2 Type S or 1 Type R

Looking4aSystem · Post by **Looking4aSystem** » Mon Aug 01, 2005 7:46 am

Whats the price difference between the S and the R in canadian $$$?
Never mind, i looked it up!

So 1 Type R is better then 2 Type S?????

sinister audio · Post by **sinister audio** » Mon Aug 01, 2005 7:51 am

http://www.woofersetc.com/index.cfm?fus ... gory_id=23

type r 12 is 140 and a type s 12 is 110. its worth the 30 bucks difference. you can probaly get them off ebay for 20 bucks less

Looking4aSystem · Post by **Looking4aSystem** » Mon Aug 01, 2005 8:16 am

The difference is like $100 CDN here!!! The MAX i can spend on a system is $950 CDN

Looking4aSystem · Post by **Looking4aSystem** » Mon Aug 01, 2005 8:45 am

Answer the question!!

WHAT IS BETTER, 1 TYPE R or 2 TYPE S?

sinister audio · Post by **sinister audio** » Mon Aug 01, 2005 8:50 am

there is alot of variables to tell you wich is better, type of box, how good of box, what amp options do you have, what is your preference (loud/sound good), how good it is installed, ect.

Ryan from Ohio · Post by **Ryan from Ohio** » Mon Aug 01, 2005 12:26 pm

2 type s IMO

Looking4aSystem · Post by **Looking4aSystem** » Mon Aug 01, 2005 6:12 pm

lol i was venting a little...Sorry :)

I want SPL at a higher volume and SQ at lower volumes.

Might still use the amp i posted, i will get the full model no. tomorrow.

The box is custom and will be made out of 3/4" MDF. The install will be good quality with 1/0 Gadge Wire, and i will upgrade Frame-to-Negative Batt With 1/0 Gadge

Ryan from Ohio · Post by **Ryan from Ohio** » Tue Aug 02, 2005 3:38 am

[quote="Looking4aSystem"]
I want SPL at a higher volume and SQ at lower volumes.
/QUOTE]

There is no such thing. its either one way or another.

Dont forget the cable from the alternator to the battery. Its just as important as the chassis ground.

Looking4aSystem · Post by **Looking4aSystem** » Tue Aug 02, 2005 7:16 am

Are the Type-S more towards SQ or SPL?

sinister audio · Post by **sinister audio** » Tue Aug 02, 2005 7:38 am

if you wanted sq i would go with a type r in a proper sealed box, if you wanted spl i would go with 2 type s in a ported box