wiring a aftermarket for a 98 lexus es 300

tah · Post by **tah** » Mon Oct 04, 2010 7:34 am

can anyone tell me what coler the stock wires are which wires they are, ignition, power, ground, ect?

Bwcad1 · Post by **Bwcad1** » Mon Oct 04, 2010 7:40 am

Constant 12V+ White Ignition Switch Harness
Starter Red Ignition Switch Harness
Ignition Black/Red Ignition Switch Harness
Ignition 2 Black/Yellow Ignition Switch Harness
Accessory Blue/Red Tests as Ignition
Tach Black Or White/Red 4 Cylinder At Coil Pack.
Brake Switch Green/White Brake Switch
Trunk Release Red (-) Driver's Kick Panel
Trunk Pin Green/White (-) Driver's Kick or Factory Alarm Module*
Parking Lights Green/Black (+) Driver's Kick Panel
Hood Pin Black (-) Switch or Factory Alarm behind Ash Tray
Door Trigger Red/White (-) Top right of Fuse Panel
Door Lock Blue/White (-) Driver's Kick Panel
Door Unlock Red/Green (-) 2 Pulse to Unlock and Disarm Alarm
Horn Wire White Connector bottom Green/Black (-)
Windows Up LF=Green, RF=Green/White, LR=Green/Yellow, RR=Green/Black
Windows Down LF=Red, RF=Red/Blue, LR=Red/Yellow, RR=Red/Black

tah · Post by **tah** » Mon Oct 04, 2010 7:46 am

what about the speakers and remote wire and what is ignition 2 for

tah · Post by **tah** » Mon Oct 04, 2010 7:49 am

im confused i need to know what coler the ignition ground power speakers and remote wire are. the ones that come stock because i cant seem to find any harnesses for the model lexus i have

Bwcad1 · Post by **Bwcad1** » Mon Oct 04, 2010 7:49 am

ok what are you trying to do first of all.

Ignition Black/Red Ignition Switch Harness

Ground black but you should ground to some metal on the body or frame There is no schematic for the speaker colors and the car doesn't have a remote wire that's for turning amps on.

I highly recommend you take whatever your doing to a professional before something catches on fire.

tah · Post by **tah** » Mon Oct 04, 2010 7:50 am

put an aftermarket radio in my car but without using a wire harness clip thing

Bwcad1 · Post by **Bwcad1** » Mon Oct 04, 2010 7:55 am

This website has all the necessary wiring adapters and dash kit information take the part numbers and search them.

http://www.metraonline.com/fit.aspx

Bwcad1 · Post by **Bwcad1** » Mon Oct 04, 2010 7:55 am

Do not cut into your factory wiring. Take it to a pro and let them do it the right way.

tah · Post by **tah** » Mon Oct 04, 2010 7:56 am

im trying to figure out which wires to connect the aftermarket radio to in the car

tah · Post by **tah** » Mon Oct 04, 2010 7:57 am

im trying to do this just for the sake of being able to do it myself i want to learn. this is what i want to do for a living