question on setting foe an audioque amp

drdoom23 · Post by **drdoom23** » Thu Mar 12, 2009 4:45 pm

oki just had my audioque amp installed and it seems as though my fosgate 300.1had the subs hitting harder crazy right lol butim thinking the installer didnt set the settings right on the amp does anyone have any suggestions mind u its wired at 2ohms please help also its not hard to set those correct? :help:

drdoom23 · Post by **drdoom23** » Thu Mar 12, 2009 5:30 pm

anybody

JeremyC · Post by **JeremyC** » Thu Mar 12, 2009 5:48 pm

LOL come on man we all have lives here, so it might take us a little while to reply.

http://www.caraudiocentral.net/forums/s ... php?t=7686

That should do the trick. Let me know if you need any help understanding it

drdoom23 · Post by **drdoom23** » Thu Mar 12, 2009 5:57 pm

lol sorry,okay i have a digital reader but the rms out put on the amp the guy said was about 900 at 2 ohms 876 i think on the site so im not sure exactly what it puts out u know and should i just call tech support there and see what he says to have it set at cause i think the guy who did the install used kicker settings. (since thats what the shop sells most)cause honestly my fosgate sounded a lot diffrent then this one it seem to hit harder and to me thats off since this has way more rms,i mean hell like i had said the fosgate was a 300.1

drdoom23 · Post by **drdoom23** » Thu Mar 12, 2009 6:12 pm

the strange thing is i saw this problem on another post i have to have my bass nob up all the way and on my head unit i have to turn the bass up to 6 and the bass boost up to 3 4 5 or 6 to get good bass and it just seems odd to me u know

loudwagon15s · Post by **loudwagon15s** » Thu Mar 12, 2009 9:05 pm

kicker amp settings

turning your bass boost up on the head unit and the amp will do nothing but clip the hell out of the signal, and fry your sub(s) and/ or your amp. Give us a detailed description of your entire setup, that way it is much easier to help

drdoom23 · Post by **drdoom23** » Fri Mar 13, 2009 5:26 am

Okay here goes I have a pioneer premiere deh-p700bt h.u, 4gauge monster wires an audioque amp,and 2 RE SE dual 2ohm subs I'm te building the current box RE sent me the exact box foe he subs and the controls if that's what ur asking I'm going to have to un mount the amp,so let me know ,I don't know if u have to do this with all amps but I told him it needed to be wired in a daisy chain,I had givin him the setting for the sub sonic setting and the low pass filter one was supposed to be set to 100 the other 30

Bwcad1 · Post by **Bwcad1** » Fri Mar 13, 2009 5:31 am

bcae1.com

Start reading and you will learn. cause what Im seeing is wrong.

By the way What in the hell is "foe" is that supposed to be for? or some shit?

drdoom23 · Post by **drdoom23** » Fri Mar 13, 2009 5:36 am

Also on the mounted bass knob thes is a spot were it says clipping and there is no indication from that light that there is any clipping oh also on that knob he set it backwards min is max and max is min lol if ur ever in denver never go to sound on wheels

drdoom23 · Post by **drdoom23** » Fri Mar 13, 2009 5:39 am

Ya lol I meant for I was working and doing this from my blackberry bold lol now I can't change it lol,and what u mean start reading lol?