Amp trouble

jgs07 · Post by **jgs07** » Sun Sep 14, 2008 9:32 pm

i was trying to fix the rca's on my amp that is feeding my interiors and by accident i disconnected a blue wire that connects the amp that is feeding my interiors to the amp that is powering my subs. does anyone know where i am suppose to connect the blue wire to? one end is still connected to the amp that is powering the subs. i just dont know where the blue wire goes on to the amp that is powering the interiors.

Bwcad1 · Post by **Bwcad1** » Sun Sep 14, 2008 9:52 pm

its most likely the remote wire but i cant be sure. can you get us a picture? there are 3 major wires on your amp positive (batt 12v) negative (ground) and Remote wire.

jgs07 · Post by **jgs07** » Sun Sep 14, 2008 11:16 pm

here are the pics. i think i should mention that both amps share the same 4 gauge wire.

Ryan from Ohio · Post by **Ryan from Ohio** » Mon Sep 15, 2008 2:05 am

Little blue wire is the remote turn on.

jgs07 · Post by **jgs07** » Mon Sep 15, 2008 11:08 am

yeah but where do i connect it to on the amp that is powering the interior speakers?

Bwcad1 · Post by **Bwcad1** » Mon Sep 15, 2008 11:15 am

the plug that says remote wire.

jgs07 · Post by **jgs07** » Mon Sep 15, 2008 5:56 pm

ok thanks for the help. got one more quick question though. how is it that both amps are sharing the same 4 gauge wire? the guy who installed never really told me.

Mon Sep 15, 2008 6:29 pm

Do you have 4 gauge going to each amp?

Follow the wire back, and see if there is a distribution block.

jgs07 · Post by **jgs07** » Mon Sep 15, 2008 8:06 pm

yeah there is a distribution block. does this distribution block in any way lessen the performance of the amps?

Bwcad1 · Post by **Bwcad1** » Mon Sep 15, 2008 8:37 pm

Nope as long as its the same size