Attention all members!
Have a cool ride? Then show it off on our website! All vehicles welcome!

.7 into 1 ohm stable amp

All questions related to amplifier installation and troubleshooting.
Bwcad1
Master of My Domain
Posts: 9312
Joined: Wed Aug 03, 2005 11:00 am
Location: Ohio

Post by Bwcad1 »

lol no ones dumb dude 99per of people dont understand impedance rise basicly each frequency can change the load your amp see's your amp is never seeing one load its constantly changing from your nominal up usually. unless you go below tuning freq which can actually cause impedance decrease which is ext harmful to amps. that make any sense?
ImageImage


ΜΟΛΩΝ ΛΑΒΕ
smoker
Master of My Domain
Posts: 4126
Joined: Tue Mar 15, 2005 9:00 am
Location: florence, ky
Contact:

Post by smoker »

Bwcad1 wrote:the only time ac/dc would matter is when you get high current enough that the skin effect would create differences in impedance but thats about it.
true, you are a scholar bill.......and a sexy gentleman
colemanyoungerinalaska
Senior Member
Posts: 806
Joined: Tue Feb 06, 2007 3:26 am
Location: alaska

Post by colemanyoungerinalaska »

box is tuned to 28 hz
so basically anything above 28 hz and im fine
sealed would probably be safer h
colemanyoungerinalaska
Senior Member
Posts: 806
Joined: Tue Feb 06, 2007 3:26 am
Location: alaska

Post by colemanyoungerinalaska »

with the subsonic filter set correctly i should be fine
colemanyoungerinalaska
Senior Member
Posts: 806
Joined: Tue Feb 06, 2007 3:26 am
Location: alaska

Post by colemanyoungerinalaska »

lcr meters are cool
Post Reply