Attention all members!
Have a cool ride? Then show it off on our website! All vehicles welcome!

Blowing fuse on amp..

All questions related to amplifier installation and troubleshooting.
my95z34
Junior Member
Posts: 11
Joined: Wed Sep 12, 2007 8:27 pm
Location: Wayne Michigan
Contact:

Blowing fuse on amp..

Post by my95z34 »

Ok, I've got a Sony Xplode 1000w amp running my 6x9's *dont hate* and starting about 2 weeks ago it will randomly blow the fuse on the amp. Sometimes it'll last for weeks, other times it'll blow fuse after fuse, as fast as I can put them in, they blow.

What would cause this?
JeremyC
Master of My Domain
Posts: 2329
Joined: Sat Jan 15, 2005 4:13 am
Location: Oklahoma

Post by JeremyC »

Xplode

Seriously, it could be internal to the amp.

I had one almost catch on fire on me.

The only other thing, check all your wires, and make sure there is no way they could be shorting out.
User avatar
William from NOLA
Posts: 5172
Joined: Tue Oct 05, 2004 8:00 am
Location: Metairie, LA
Contact:

Post by William from NOLA »

Check your wiring to the sub, are you sure you have them wired for the correct ohms? You may be running a load that the amp can't do.

And also, do check the wiring to the subs and be double sure (if you are sure, that is). Never hurts to go over your work :)
A.K.A. megahurts4 :: Member since: July 19, 2002 :eek:
my95z34
Junior Member
Posts: 11
Joined: Wed Sep 12, 2007 8:27 pm
Location: Wayne Michigan
Contact:

Post by my95z34 »

The wires are all good going to the speakers, and I'm pretty sure it's prolly the ground.

@William from NOLA: It's pushing 6x9's. :)
User avatar
William from NOLA
Posts: 5172
Joined: Tue Oct 05, 2004 8:00 am
Location: Metairie, LA
Contact:

Post by William from NOLA »

Haha, wow. I can't read.
A.K.A. megahurts4 :: Member since: July 19, 2002 :eek:
my95z34
Junior Member
Posts: 11
Joined: Wed Sep 12, 2007 8:27 pm
Location: Wayne Michigan
Contact:

Post by my95z34 »

lol, shit happens.
pimpmaynard
Member
Posts: 56
Joined: Sat Jul 21, 2007 6:35 pm
Location: flint, mi

Post by pimpmaynard »

who in their right mind puts 1000watts to a pair of 6x9s? i bet the rms on that amp is like, 100 watts or something.
my95z34
Junior Member
Posts: 11
Joined: Wed Sep 12, 2007 8:27 pm
Location: Wayne Michigan
Contact:

Post by my95z34 »

It's a Sony amp, so obviously its not really 1000w.

And the 6x9's are 280w a piece.
cargodz
Master of My Domain
Posts: 4771
Joined: Tue Jul 04, 2006 7:21 am
Location: NW Ohio
Contact:

Post by cargodz »

Start checking the wiring going to the amp... there is probably a short there somewhere... If not could be internal
-Michael
http://www.teamcargodzinc.com :thumbsup
Hear It, See It, Feel It, Punch It!
And Proud Sponsor of
Team Wolf Pack Audio
Authorized Dealer
my95z34
Junior Member
Posts: 11
Joined: Wed Sep 12, 2007 8:27 pm
Location: Wayne Michigan
Contact:

Post by my95z34 »

Well I just found out that a bad ground could cause this. And I've been having issues with the ground since this started happening.

But yesterday I got pissed and just took the amp out and hooked the speakers back up to the HU and they sound great. Actually almost better than when they were on the amp.

So maybe if I get bored later, I'll hook it back up. But prolly not, lol.
Post Reply