Car Audio Central - Ultimate Car Audio Forum and Community

by **Scarrell** » Fri Sep 22, 2006 3:24 pm

if anything, resin the inside of it.. Camaro boxes can be a b!tch..

http://s47.photobucket.com/albums/f200/ ... l/Woodrow/

look at my build for a Camaro.. two 15" W6's on a JBL 600.1..

all cuts are made using a jigsaw.. sloooooooooow..

by **Darthness** » Fri Sep 22, 2006 2:11 pm

7/8 > 3/4.

by **Justin from Detroit1** » Fri Sep 22, 2006 2:07 pm

Wow, didn't think it was that thick, it looked thin!

by **Bwcad1** » Fri Sep 22, 2006 10:23 am

7/8s thick is plenty should be a decent box then.

by **KrisB410** » Fri Sep 22, 2006 10:17 am

I think I'm gonna try and use it. The wood is 7/8in thick, and the construction seems pretty good. The only problem I foresee is that the subs can't be more than 5in deep from the bottom of the mounting flange to the bottom of the magnet. (You guys understand that description?) How would I measure the volume of this unuasually shaped box?

And Chris, good eye!

by **Chris from Washington** » Fri Sep 22, 2006 8:41 am

Looks to be made pretty well. Cuts look OK, no boo-boos that my boxes always seem to have (lol)

For a free box, give it a try. Just make sure your subs specs match the volume of the box. Make sure it's sealed good ect.

Hey are those the tail lights in the background you were going to convert to LED?

by **audiobass10** » Fri Sep 22, 2006 6:07 am

Bwcad1 wrote:Ehh IMO center divider doesn’t really do much when the box is sealed. And if it is birch the wood is thick enough birch is stronger than typical MDF but most people don’t use it because its $$$

X2 agreed

by **Bwcad1** » Fri Sep 22, 2006 4:22 am

Ehh IMO center divider doesn’t really do much when the box is sealed. And if it is birch the wood is thick enough birch is stronger than typical MDF but most people don’t use it because its $$$

by **Chris from MI** » Fri Sep 22, 2006 12:24 am

Looks like it is made out of Birch. You will need to figure out the internal volume to see if it matches your subs. Also it doesn't look like there is a divider in the box either, is it all one box? You don't want your subs sharing the same air space. It might be "usable" but not recommended.

by **Justin from Detroit1** » Thu Sep 21, 2006 9:07 pm

That wood is too thin, I would not advise using it.

Car Audio Central - Ultimate Car Audio Forum and Community

So is this any good?

Post a reply

Expand view Topic review: So is this any good?