Hey guys, i had that other post about what amp and now i know what to look for. This is one of the main amps i came up with.
http://www.bestbuy.com/site/olspage.jsp ... 9396976115 Those are my subs
Woofer Size 12"
Woofer Material Injection-molded polypropylene with brushed metallic surface
Magnet Size 38 oz
Magnet Type Neodymium
Continuous Power Handling 600W
Peak Power Handling 1,100W
Impedance 4 ohms
Connection Type Terminal cup
Number of Voice Coils Single
Efficiency 89dB
and this is the amp i found.
http://www.sonicelectronix.com/item_6198.html
Number of Channels 2
RMS Power (4 ohms) 220 watts x 2 chan.
RMS Power (2 ohms) 280 watts x 2 chan.
RMS Power (1 ohm) Not Stable
Bridged RMS Power 560 watts x 1 chan.
Peak Power Output 980 watts
Min. Impedance Unbridged 2 ohms
Min. Impedance Bridged 4 ohms
THD @ Rated RMS Power <0.02%
Speaker Level Inputs Yes
Amp Preamp Outputs Yes - 1 Pair
Built-in Crossover Yes
High-Pass Crossover 50 Hz - 500 Hz
Low-Pass Crossover 30 Hz - 500 Hz
Signal-to-Noise Ratio >98 dB
Channel Separation >55 dB
Bass Boost 0 - 24 dB
Bass/Gain Remote N/A
Fan Cooled N/A
Fuse Rating 15A x 4
Warranty 1 - year manufacturer's warranty
Do you think i would be good with that amp or do you think i would blow my subs? What do you guys think?
Thanks a lot for any help.
Mike
Hey guys, i had that other post about what amp and now i know what to look for. This is one of the main amps i came up with.
[url]http://www.bestbuy.com/site/olspage.jsp?skuId=7044085&type=product&productCategoryId=cat03081&id=1099396976115[/url] Those are my subs
Woofer Size 12"
Woofer Material Injection-molded polypropylene with brushed metallic surface
Magnet Size 38 oz
Magnet Type Neodymium
Continuous Power Handling 600W
Peak Power Handling 1,100W
Impedance 4 ohms
Connection Type Terminal cup
Number of Voice Coils Single
Efficiency 89dB
and this is the amp i found. [url]http://www.sonicelectronix.com/item_6198.html[/url]
Number of Channels 2
RMS Power (4 ohms) 220 watts x 2 chan.
RMS Power (2 ohms) 280 watts x 2 chan.
RMS Power (1 ohm) Not Stable
Bridged RMS Power 560 watts x 1 chan.
Peak Power Output 980 watts
Min. Impedance Unbridged 2 ohms
Min. Impedance Bridged 4 ohms
THD @ Rated RMS Power <0.02%
Speaker Level Inputs Yes
Amp Preamp Outputs Yes - 1 Pair
Built-in Crossover Yes
High-Pass Crossover 50 Hz - 500 Hz
Low-Pass Crossover 30 Hz - 500 Hz
Signal-to-Noise Ratio >98 dB
Channel Separation >55 dB
Bass Boost 0 - 24 dB
Bass/Gain Remote N/A
Fan Cooled N/A
Fuse Rating 15A x 4
Warranty 1 - year manufacturer's warranty
Do you think i would be good with that amp or do you think i would blow my subs? What do you guys think?
Thanks a lot for any help.
Mike