Page 1 of 1
Dls A6
Posted: Fri May 09, 2008 6:56 am
by falkenbd
Does anyone know about this amp? Specifically if there is an older version of it?
The website for DLS says the amp is stable to 1 ohm and is 1200 wrms at this load.
The manual that came in the box for mine (it was used) says the amp is stable to 1,33 ohms.
Posted: Fri May 09, 2008 7:22 am
by Bwcad1
the math says its capable. looks decent
Posted: Fri May 09, 2008 9:38 am
by falkenbd
Bwcad1 wrote:the math says its capable. looks decent
Can you elaborate on this? I really want to know if its 1 ohm stable or not, the website and the manual I got with mine don't match.
Another question I have is, one of the fins is bent, how hard would it be to bend it back without breaking it?
Posted: Fri May 09, 2008 9:50 am
by Bwcad1
you wont bend it back. and im a tooling guy i know metals.
it has 4 35amp fuses 4 x 35 = 140 total amps
amps 140 x voltage 13.8 = 1932 watts estimated 70% efficency so 1932 x .7 = 1352w
Posted: Fri May 09, 2008 10:04 am
by falkenbd
you wont bend it back. and im a tooling guy i know metals.
at least i know not even to mess with it.
amps 140 x voltage 13.8 = 1932 watts estimated 70% efficency so 1932 x .7 = 1352w
thanks, i've really got to start remembering that one. i forgot all the electrical formulas i learned in college. some of my required classes were Electrial Engineering, but as a comp sci major i quickly forgot.
So why does the website say its 1ohm stable and my manual says 1,33 ohm stable? I can't find anything about an older version of it. It looks just like all the pictures I see.
Posted: Fri May 09, 2008 10:16 am
by Bwcad1
not sure. but im sure it would be fine at 1 if its stable at 1.33 your impedance rise will come up enought anyways
Posted: Fri May 09, 2008 12:39 pm
by falkenbd
In the manual it does talk about having two dual 4ohm voice coil subs.
The amp has a fan, and an external fan control and I plan on having it in a false floor with a couple of fans ventilating the amp compartment.