Sub and Amp Opinions
Posted: Mon May 07, 2007 6:36 pm
Me and a friend were looking at amps and he came accross the "Power Acoustik "Plasma Sphere" 2-Channel Amplifier 620 Watts Max" and says it would make my system bump alot better than my p.o.s. pyramid. I plan on running 2 memphis PR 12's off of it.
heres the specs on the Acoustik amp:
·4 Ohm RMS 150 Watts x 2
·2 Ohm RMS 180 Watts x 2
·Mono RMS 360 Watts ·Bridged Max 620 Watts
·Dimensions (WxHxD) 11.25 x 2.25 x 11.
·Synchronized Lightning Pulse Dish
·Full Mosfet Power Supply ·PWM Circuitry
·Full Selectable Crossover Hi/Full/Low
·Remote Dash Mount Bass Knob Control
·Three Way Protection Circuit
·2 Ohm Stable Stereo
·Tri-Mode Capable
·Variable Low Pass 40Hz-250Hz
·Variable Hi Pass 40Hz-250Hz
·Variable 18 dB Bass Boost @ 40Hz
·Variable Subsonic Filter 60Hz- 200Hzt
·Frequency Response: 10Hz to 30KHz
·S/N Ratio: 98 dB
·THD: 0.02%
·System Distress Indicator
·4 Gauge Power/Ground Connection
·Diamond Cut Heat Sink
·Platinum Plated RCA Connectors
·Line Output
·High/Low Level Inputs with Floating Ground
specs on the sub:
2" Black anodized aluminum vented voice coil former
High-strength wide roll surround
Chrome plated vented basket
Tough rubber top gasket
RMS/Peak (W)- 250/450
Sensitivity (dB) - 88
Magnet Size (Oz) - 50
Mounting Depth (in) - 5.4
How well do you guys think that amp would work with these subs?
ALSO one last thing..He is running 2 Lanzar MAXP124D's.
they are rated at 800Wrms and 1600 max.
But are only $40 on some sites?
Is Lanzar that bad of Quality?
Someone let me know....
(http://www.lanzar.com/itempage.asp?MODEL=MAXP124D)
heres the specs on the Acoustik amp:
·4 Ohm RMS 150 Watts x 2
·2 Ohm RMS 180 Watts x 2
·Mono RMS 360 Watts ·Bridged Max 620 Watts
·Dimensions (WxHxD) 11.25 x 2.25 x 11.
·Synchronized Lightning Pulse Dish
·Full Mosfet Power Supply ·PWM Circuitry
·Full Selectable Crossover Hi/Full/Low
·Remote Dash Mount Bass Knob Control
·Three Way Protection Circuit
·2 Ohm Stable Stereo
·Tri-Mode Capable
·Variable Low Pass 40Hz-250Hz
·Variable Hi Pass 40Hz-250Hz
·Variable 18 dB Bass Boost @ 40Hz
·Variable Subsonic Filter 60Hz- 200Hzt
·Frequency Response: 10Hz to 30KHz
·S/N Ratio: 98 dB
·THD: 0.02%
·System Distress Indicator
·4 Gauge Power/Ground Connection
·Diamond Cut Heat Sink
·Platinum Plated RCA Connectors
·Line Output
·High/Low Level Inputs with Floating Ground
specs on the sub:
2" Black anodized aluminum vented voice coil former
High-strength wide roll surround
Chrome plated vented basket
Tough rubber top gasket
RMS/Peak (W)- 250/450
Sensitivity (dB) - 88
Magnet Size (Oz) - 50
Mounting Depth (in) - 5.4
How well do you guys think that amp would work with these subs?
ALSO one last thing..He is running 2 Lanzar MAXP124D's.
they are rated at 800Wrms and 1600 max.
But are only $40 on some sites?
Is Lanzar that bad of Quality?
Someone let me know....
(http://www.lanzar.com/itempage.asp?MODEL=MAXP124D)