Page 1 of 1
Cadence ZRS-10
Posted: Mon Apr 02, 2007 9:12 am
by Schmuck
Does it do the rated 2500RMS. I need to know because i have read mixed reviews. And i can get 2 from ebay for $500 but if they are junk lmk.
Posted: Mon Apr 02, 2007 1:41 pm
by cargodz
Maybe this will help, specs directly at Cadence Archives:
http://www.cadencestore.com/ProductCart/pc/viewPrd.asp?idcategory=17&idproduct=11
So yeah 2500wrms @ 1ohm
Posted: Mon Apr 02, 2007 5:12 pm
by smoker
yea but i got a legacy la1000 that claims 300x2 and it says so in the manual but....will it REALLY do it?
my experience with cadence has all been with second hand equipment but it seemed pretty solid...no noise and plenty of power but i dont remember which ones i used or what the power rating was
Posted: Mon Apr 02, 2007 6:01 pm
by nd4spd18
No, from what I have heard they are overrated. Here is a bench test of one:
http://forum.soundpressure.com/showthread.php?t=209
Posted: Mon Apr 02, 2007 6:05 pm
by Bwcad1
there are very very very few amps that will actually do rated power in a real world application. Who actually did the test because if it was DD id use it for TP
Posted: Mon Apr 02, 2007 6:32 pm
by nd4spd18
I believe those tests were done by one of the people on that forum. Some the other amps there also did more than their rated power.
There is also a guy who goes by the name "pwuthedon" on there who had a ZRS 10 and said it didn't do it's rated power.
Posted: Mon Apr 02, 2007 6:33 pm
by Bwcad1
to many personal agendas to trust anyones judgment in car audio but my own.