Page 1 of 3

Fi Audio X 10"

Posted: Tue Jan 30, 2007 9:07 am
by Bwcad1
Recently i acquired 4 FI car audio X 10" subs, there entry level. first the specs

Subs:
courtesy of Justin Thorton aka teamsubgopoof

There dual 4 ohm coil woofers with standard cast 12 spoke basket and standard pulp paper cone. standard for entry level woofers except most cheap woofers use a stamped basket. overall i was very pleased with the ascetics and they seemed pretty beefy for 10's double stacked magnets and 2.5 coil. 300w RMS

Amp:
courtesy of terry aka smoker

2 crunch GP 1600.1
each running at 1 ohm at about 800w.
gains set correctly sub sonic set at 28hz and low pass 65hz.

Enclosure:
Built by Joey C

1 large enclosure dived in 2. each chamber is about 3.25cf
2 aero's per side tuned to 30hz
resin all around and glassed corners

review:

my first impression was WOW. these little subs were getting insanely loud and getting very very low! but upon testing i noticed one of the subs ticking loudly. upon further inspection i noticed the tinsel leads were longer than the other subs and were slapping the cone. i emailed Scott at FI and in less than 20 mins he informed me that the sub will be replaced free of charge. now even with only 2 of the subs running and one of the GP 1600s im in the low 40's with noticeable ear pain. the subs are playing insanely low and sound incredible. u all know me and i love the loud and will sacrifice sq and tuning freq to get them loud but in this case i don't need to. even at 30hz these subs make my ears hurt. im throughly impressed by even FI's lower level subs.

ill update later with numbers and when i receive the replacement sub. ill post pictures later tonight.

Posted: Tue Jan 30, 2007 11:14 am
by swimmerdude
mmmmmmmmmm.... those sound like awesome entry level subs. They COULD of been usefull for the people who have very little money. But Fi cut the X line because they were by far the least selling of their lines.

I can't wait to here these in toledo this weekend Bill :thumbsup

Posted: Tue Jan 30, 2007 6:47 pm
by jblackwell
damn cant wait to see this

Wow 2 10s in the 40s? impressive cant wait to see more

any more infO?

Posted: Wed Jan 31, 2007 3:56 pm
by Bwcad1
Image

Image

Image

results 137.5 bass race.

141 @ 50hz burp.

now this is just 2 subs with only 1 GP1600.1 at 1 ohm for about 800w.

Posted: Wed Jan 31, 2007 4:37 pm
by two4fifteen
im still planning on getting their Q 15". money has just been tight. probably with my tax return. i'll let you all know how it sounds.

Posted: Wed Jan 31, 2007 4:43 pm
by Bwcad1
anyone notice my giant 6in hole saw? perfect for aero ports ;) but expensive as hell!

Posted: Wed Jan 31, 2007 5:41 pm
by smoker
yea ther like 50 bucks aint they?

Posted: Wed Jan 31, 2007 5:42 pm
by Bwcad1
yea 49 bucks but it works like a charm and is the perfect size.

Posted: Wed Jan 31, 2007 5:48 pm
by Ryan from Ohio
You need a roputer with a circle jig...

Already got the router, now buya circle jig off me ;)

Posted: Wed Jan 31, 2007 5:49 pm
by Bwcad1
nah the hole saw is perfect for the ports but the sub holes would be good.