Page 1 of 2
New
Posted: Sat Nov 04, 2006 3:05 pm
by ZeroAccess
Hey, my name is Glen and I'm from Georgia.
Since I've been 16 (now 22..23..somewhere round there) I've had numerous 10" subs and 1 pair of 12" subs.
Blown a few saved a few ..yadda yadda yah...
Now I'm poor and broke and can't just throw money away like I used too so umm ya....
Posted: Sat Nov 04, 2006 3:40 pm
by cargodz
Welcome Glen... Hope you stick around... maybe even learn a lil while your here, we got lots of great knowledgable people :)
Posted: Sat Nov 04, 2006 4:36 pm
by Ryan from Ohio
Welcome to the ghetto
Im poor too, really!
But I save for what I truly want.
Posted: Sat Nov 04, 2006 4:44 pm
by Chris from MI
[quote="Ryan from Ohio"]Welcome to the ghetto ]
OK, I may just be crazy but the words Poor and McIntosh don't go well together......
J/K You said you save for what you want LOL
Oh yeah and welcome to the board to Glen!!
Posted: Sat Nov 04, 2006 5:30 pm
by ZeroAccess
I was thinking the same exact thing I didn't even know McIntosh was a brand and then I read a few post and saw he wanted one so I was like aight I'll check ebay...found one for 1,500 and didn't know what it did just knew I wanted it.
Posted: Sat Nov 04, 2006 7:56 pm
by OnYrMrk
The McIntosh Mx406 retails for $2000, the MX4000 (Ryan's model) sold for about $2500, and the MX5000 (Flagship model) sold for around $3000. Ryan got one heck of a deal on a MX4000 for under a grand. He had under a grand, then spent it, and so now...he is poor.
Welcome to the forum Glen! We have alot of fun here learning more and more about this awesome hobby of ours......basketweaving!
Posted: Sat Nov 04, 2006 8:13 pm
by ZeroAccess
Yea, I am reading a website about subs and I don't even know what everything means and I figured I'd understand a few things...
DUAL 1 | DUAL 2
Fs: 028.4 Hz | 27.1 Hz
Re: 0.7 Ohms/coil | 1.4 Ohms/coil
Qms: 05.39 | 5.63
Qes: .49 | .48
Qts: .45 | .44
Mms: 211g | 231g
Cms: 0.15mm/N | 0.15mm/N
Sd: 481cm^2 | 481cm^2
Vas: 48.3 l | 48.3 l
Spl: 85.4dB 1W/1m | 84.8dB 1W/1m
Bl: 10.4 N/A | 15.1 N/A
Xmax: 27mm
Rms: 1000W
Sealed box: .8-1.5 cuft
Ported box: 1.8-2.5 cuft @ 28-33Hz
Sub OD: 12.500”
Cut ID: 11.125”
Mounting depth: 7.000”
Displacement: 0.16cuft
Like what the hell does that stuff mean!?!?
How can you have a coil thats .7ohm's How would you begin to wire that to a 2ohm stable amp ...ya know crap like that
Posted: Sat Nov 04, 2006 8:40 pm
by Scarrell
to go even further.. theres a few diagrams that show you how to wire your basic dual 2 and 4ohm coils, and single voice coils.. but someone needs to make a diagram for the quad coil and .5ohm coils or whatever and all that junk.
Posted: Sat Nov 04, 2006 9:03 pm
by ZeroAccess
Like basic ones 4ohm subs going to 8 or 2 ohms and 2 ohm subs going to 4ohm and 1ohm operations I got down pat...
Now I'm overloaded with information...At least I got some resin and what not to fiberglass me a box (forgot about that in the garage)
Posted: Sun Nov 05, 2006 6:16 am
by cargodz
ZeroAccess wrote:Yea, I am reading a website about subs and I don't even know what everything means and I figured I'd understand a few things...
DUAL 1 | DUAL 2
Fs: 028.4 Hz | 27.1 Hz
Re: 0.7 Ohms/coil | 1.4 Ohms/coil
Qms: 05.39 | 5.63
Qes: .49 | .48
Qts: .45 | .44
Mms: 211g | 231g
Cms: 0.15mm/N | 0.15mm/N
Sd: 481cm^2 | 481cm^2
Vas: 48.3 l | 48.3 l
Spl: 85.4dB 1W/1m | 84.8dB 1W/1m
Bl: 10.4 N/A | 15.1 N/A
Xmax: 27mm
Rms: 1000W
Sealed box: .8-1.5 cuft
Ported box: 1.8-2.5 cuft @ 28-33Hz
Sub OD: 12.500”
Cut ID: 11.125”
Mounting depth: 7.000”
Displacement: 0.16cuft
Like what the hell does that stuff mean!?!?
How can you have a coil thats .7ohm's How would you begin to wire that to a 2ohm stable amp ...ya know crap like that
Don't worry the longer your here the more you'll learn
