Car Audio Central - Ultimate Car Audio Forum and Community

Hi guys, I'm missing the 16 screws to install my JL 10W0's and was wondering if someone can give me the exact dimension of the screws that I need. Thanks!

You don't normally recieve screws with a subwoofer.
The screw lengths normally vary by the enclosure, thickness of materials.

hmm, wat size screw head would I need though for it to fit the sub?

your making a mountain out of a molehill.

GaryPham wrote:hmm, wat size screw head would I need though for it to fit the sub?

The mounting holes should be between 1/16th to 3/8ths of an inch and anything that has a 1/4 inch or slightly over head should do just fine.
If you're looking for a quick and cheap install, drywall or deck screws work fine, just make sure that you predrill your holes so as not to crack or splinter the boards.

two4fifteen wrote:your making a mountain out of a molehill.

You might be suprised as to how many people that I run into that think that subs come with stuff like screws and speaker wire.

"you mean my new sub doesn't come with an enclosure...? what a rip. well, it better not cost more than twenty bucks... i just need my boys to hear me from 10 blocks away"

heh I think you guys are misunderstanding me, I didn't buy these brand new. I actually had my cousin buy these subs for me used locally. They both came in a sealed box but I guess the guy decided to not give us any of the screws that he had been using previously, so I just wanted to know the screw dimension that I need to screw in my subs.

While I'm already asking questions, the guy actually didn't include any of the speaker wires that he had been using either! Do I just use any 12 gauge wires for them or is there a differnt type that I need? Thanks again guys and I'm sorry if these questions are all really obvious, I don't really know that much about car audio and just hoping to learn.

i was just messin around. cargodz already gave you an idea of the screw size. you could even go into your local car audio shop, bullshit with them for a minute, and ask them for a few screws. as for the wire, for W0's, 12 gauge is fine.

Sheesh guys

#6 Drywall 1" long for the sub mounting, predrill with a 3/32" bit thru the wood.

12 or 14 Ga wiring is good. Ether will be fine. YOu will want the correct crimp on connectors. Please dont jsut twist the wire around the terminal. THis sucks, falls off and could start a fire...