Page 1 of 3
Sound Storm F2600 1200 watt HELP!!!
Posted: Mon Oct 02, 2006 5:30 pm
by tycollinsh
K i just need some help. I have 2 15" kicker comps and they sound like 2 10's in my trunk. some ppl say my amp is no good and some ppl say its the box i have. so is a Sound Storm F2600 1200 watt amp good enough??? please help
Posted: Mon Oct 02, 2006 6:47 pm
by Darthness
if im looking at the same company, i don't even see a 1200w amp fromt hem.
just guessing, that amp is probably 400-500wRMS, just by looking at some of their products (ie: 1500w max, 500 RMS on one of their amps)
Posted: Mon Oct 02, 2006 7:04 pm
by JeremyC
Sound storm isn't the greatest of brands. I would look into a kicker, or JBL amp matched to the RMS of your subs. I have a feeling that 1200 watts is a peak rating that those subs will never come close to seeing from that amp.
Once you get some power, a ported box will give you about 3DBs of gain at the port freq, but I would even try it unless you have enough power to push the speakers in the first place.
I did find a 1200 watt amp on the site, its rated at 200 watts RMS a channel
Posted: Mon Oct 02, 2006 7:45 pm
by TechSys
Sound Storm = Boss Audio.
Posted: Mon Oct 02, 2006 10:35 pm
by tycollinsh
Posted: Tue Oct 03, 2006 12:57 am
by Chris from MI
Depends on how you have it wired up. They could only be getting 210 watts a piece if wired at 4ohm and prolly only about 400 if they are at 2 ohm. What is the VC config on those and how do you have them wired currently? I would look into a better amp to provide proper power and also a ported box tuned correctly.
Posted: Tue Oct 03, 2006 6:26 am
by brent
Even on 200 watts those Kickers should come alive a little. What size/type box do do you have them in? To small of a box will make them sound like crap.
Posted: Tue Oct 03, 2006 6:28 am
by Bwcad1
nah i doubt its even getting that much power with impedance rise i bet hes only getting about 80-110 watts if that.
Posted: Tue Oct 03, 2006 6:44 am
by cargodz
I used to sell SoundStorm and can tell you for a fact that amp only does 500wrms x 1 @ 2ohm... great if your pushing some cheap Volfenhag's in a prefab box... but really lacks what you need for your application.
Chances are if some people are telling you it's the amp and others are telling you it's the box.... It's probably a combination of both.
Cheap power is hard to find, but you could look at Xsite, Hifonics, Power Acoustiks, Spl, and Fusion to name a few... These are decent to good names that won't completely kill your pocket book.
Posted: Tue Oct 03, 2006 6:50 am
by Bwcad1
id put hifonics and fusion higher than the others