Page 1 of 2
Im makin a box again
Posted: Wed Jan 05, 2005 1:39 pm
by Mithrandir
Im plan on makin a large sealed box, so i dont have to get a better amp for my subs. They are infinity reference at the moment and only getting half their wattage in a 0.8 cubic foot box (ideal box for those subs) Would a 1.5 cubic foot sealed box let em work to their maximum potential without over excurting?
Posted: Wed Jan 05, 2005 2:10 pm
by Justin from Detroit1
You do know that you aren't supposed to let your subs bottom out right?
Posted: Wed Jan 05, 2005 2:18 pm
by Mithrandir
their i fixed it
Posted: Wed Jan 05, 2005 2:32 pm
by Mithrandir
here are my measurements
Height - 14
Width - 32
Depth - 16
Front - 14 x 32
Back - 14 x 32
Top - 14 1/2 x 32
Bottom - 14 1/2 x 32
Sides - 12 1/2 x 14 1/2
It will be about 1.5 cubic feet per chamber, hopefully that will be enough for em to work to their full potential
Posted: Wed Jan 05, 2005 6:11 pm
by Mithrandir
ok i went to home depot and this old dude cut my wood, some is off by 1/16, will that matter?
Posted: Wed Jan 05, 2005 9:40 pm
by Scarrell
i am not sure on sealed boxes about if the measurement is off it will effect it greatly, but i do know it will on tuned boxes...
Posted: Wed Jan 05, 2005 9:50 pm
by Justin from Detroit1
Once you start putting it together you will see. Unless all of the cuts are perfect, you will have gaps.
Posted: Thu Jan 06, 2005 2:24 am
by Mithrandir
then im gonna return the wood to home depot and flip shit on the guy
Imma straight kill those mother fckers if they dont give me my money back.
Posted: Thu Jan 06, 2005 3:14 am
by Scarrell
when you get wood cut at a place you always have them measure it and look for yourself...... i dont know if they will take it back or not since you have taken it home... but give it a try i guess...
Posted: Thu Jan 06, 2005 5:27 am
by Justin from Detroit1
If they are anything like Lowes, they will take it back.