Car Audio Central - Ultimate Car Audio Forum and Community

i need some help here i have a 97 sunfire and i just installed new door and back dash speakers...i've never had a shut off problem before but i've narrowed it down to too much bass being pushed to the speakers will cause it to shut off until i either a. turn the volume down or b. turn the bass down...does anyone know how to solve this problem? any help would be nice.


p.s. i do not have subs or anything like that

ok so you installed new speakers.. stock HU, or after market? what it sounds like is you have them wired wrong producing and ohm load that your HU cant handle at high volume.. make sure your + and - are wired right.

Well, the ohm load on a standard speaker is 4 ohm, so that SHOULDNT have anything to do with it. But that is what it sounds like if he were running a seperate amp. Also, having the + and - wires reversed SHOULDNT have an effect on the HU, it would just make the speaks sound like shit.

But like Jared said...Stock HU or Aftermarket HU? Are you using a separate amp?

If you are using a factory head unit, the problem could be the speakers. Check the impedence of the speakers you took out. Sometimes factory uses 6 ohm, 8 ohm and even 10 ohm speakers. I don't think I've seen more than 10 ohm. Anyway, that could be part of the problem.

123

HU im gonna assume thats my deck i dont know much about this stuff...but its a kenwood something or the other so its aftermarket...newer model with sirius radio bullshit...but i dont have a resistance tester at the moment to find out which is the negative and positive the colors werent coordinated with normal posi and neg...the front are done correctly but the back didnt have anything but a and b...i'll check em at work with a resistence tester tomorrow but yah i have an aftermarket deck and no amp...im in the process of putting together a complete system but i dont make 100,000 a year so im buying it slowly...i just want this to stop till than...
thx for the comments

You might have a grounding problem behind your head unit. If you don't have a good enough ground, when the amp tries to pump out the power, it's shitting off. Just a guess. Now that we know it's an after market head unit.

I'd double check all the connections behind the HU. make sure you don't have speaker wires coming loose and make sure your ground is good.

Where in AZ are you?

boost wrote:HU im gonna assume thats my deck i dont know much about this stuff...but its a kenwood something or the other so its aftermarket...newer model with sirius radio bullshit...but i dont have a resistance tester at the moment to find out which is the negative and positive the colors werent coordinated with normal posi and neg...the front are done correctly but the back didnt have anything but a and b...i'll check em at work with a resistence tester tomorrow but yah i have an aftermarket deck and no amp...im in the process of putting together a complete system but i dont make 100,000 a year so im buying it slowly...i just want this to stop till than...
thx for the comments

psssh..... i made 8500 last year and i put a system in my car... (but then i only had like 1200 in bills to pay :P)

sounds like a gain problem to me.

Darthness wrote:psssh..... i made 8500 last year and i put a system in my car... (but then i only had like 1200 in bills to pay :P)

1200 bucks in bills for a year?????


shoot, that is barely a house payment for me.... Oh to be young again.....