Setting gain on multiple amps, plz help.
Posted: Thu May 11, 2006 10:47 am
Hi,
Im about to install a JL 300/2 and a Kicker kx600.1 from a Pionner Premier deh-p960mp.
The JL 300/2 I set the gain by playing a 1Khz @0db test tone then use a digital voltage meter. But how should I set the gain on the kx600.1 that will be powering my sub???
Should I put the headunit volume to 3/4, set the JL 300/2 using the DVM, then set the gain on the kx600.1 to minimum and increase the gain till the sub distorts, then turn it down slightly???
But with the last step I would use normal music?? Because the 1Khz test tone obviously wont do anything for the sub. JL suggests a 50hz @0db test tone for subs? Should I play this test tone at 3/4 and set the gain just before distortion???
Im a bit stuck guys, anyone please help.
Im about to install a JL 300/2 and a Kicker kx600.1 from a Pionner Premier deh-p960mp.
The JL 300/2 I set the gain by playing a 1Khz @0db test tone then use a digital voltage meter. But how should I set the gain on the kx600.1 that will be powering my sub???
Should I put the headunit volume to 3/4, set the JL 300/2 using the DVM, then set the gain on the kx600.1 to minimum and increase the gain till the sub distorts, then turn it down slightly???
But with the last step I would use normal music?? Because the 1Khz test tone obviously wont do anything for the sub. JL suggests a 50hz @0db test tone for subs? Should I play this test tone at 3/4 and set the gain just before distortion???
Im a bit stuck guys, anyone please help.