Car Audio Central - Ultimate Car Audio Forum and Community

I decided to redo the amp rack under my rear seat. Some of you know i did the tape/foil fiberglass method to make a form to mount the amp. Turns out it was going to be a little smaller than I needed, DOH!! On the bright side, the first go at it was some good experience, which led to a very satisfactory second attempt. I built a three sided frame out of 3/8" baltic birch plywood, formed to the floor of course and spaced about an inch from the front and side of the seat. I layed that over a taped off floor, then taped the bottom of the form to the floor. Then foiled over it for easier removal. I glassed the living sh#t out of it after that, I think I used about 48 oz of glass and many layers of cloth(glassing it up the sides of the wood). I will post pictures of this along with my box tomorrow night!! Now all I need is an amp for it!! :)

did you post pics of that job on carstereo.com?
I swear I saw pictures of this somewhere.. or someone else did the same exact thing somewhere.. with the fiberglass tub and all.

No, wasn't me. this is the first time i've done something like this, other than my first attempt :)

So THAT's why you haven't been trying to beat the arcade games lately :)

LOL, I never played those anyway. Only took me one time each to get the high score.