Car Audio Central - Ultimate Car Audio Forum and Community

I need everyones help with purchasing the proper wiring for the system that I will be installing someday. It will be in a 96 Jeep Grand Cherokee, and I can do some measuring later to find out how much leangth I will need.

Right now this will be my system:

HU: JVC 8500 (With Sirius Tuner)

Front Stage: Cadence CWM6-KIT 6.5 (Purchased, plan to upgrade in future if needed)

Amp: Elevation Audio 125.4 (Purchased)

Sub: Elevation Audio Pro 12" (Purchased)

I plan to order all my wiring from http://www.knukonceptz.com. Definitely, need help with amp kit, power wire, what guage of wire, and anything else that I will need. This is my first ever system, and I have no clue what I need. Also, if the website says that a power cable is $1.00 does that mean per foot? Because doesn't it have to connect to the Alt?

Thank you for your help in advance.

Jason

Yes, that is per foot, and your power wire connect to the battery, not alternator. All you need in a 4 gauge wiring kit from KnuKonceptz. That'll be all the wiring you need.

I would go with one of the 4 guage amp kits, that comes with a distro block with 8 guage outputs. You could even go 2 or 0 guage if your planing on going much bigger in the future.

Make sure you get one with 3 sets of RCAs, one for the sub, one for the rear, and one for the front.

Then I would get an extra set of power wire conectors, so you can upgrade the big 3.

And no you do not hook the amps power wire to alternator. It hooks to the battery +, and then your amp ground hooks to bare chassy metal. The ground is very important, and is something alot of people tend to mess up. Make sure you keep it as short as possiable, and remove any paint or dirt that might hurt the conection. I even put lock washers on all my grounds so they stay nice and tight. A wire brush atatched to a screw gun or a dremil does a real good job prepping an area before you make the conection.

As for the big 3, thats where you hook the alternator up. I like to add a second wire (leaving the factory) from the battery to ground, the alternatot output to battery + and the alternator chassy to a chassy ground (or battery ground).

Damn you Justin, you beat me to it.

Thanks guys I just figured I would need more.