Car Audio Central - Ultimate Car Audio Forum and Community

Posted: **Sat Dec 17, 2005 9:26 pm**

anyone know hwere i can find the full t/s specs for my jl 13w1v2-4? i want to play around with winisd a little and see if i can't deisgn a good loud box

Posted: **Sat Dec 17, 2005 9:50 pm**

Im assuming you have already checked their site? You may have to email them for specifics.

If not, here are all the specs:
Free Air Resonance (Fs): 20.9 Hz
Electrical “Q” (Qes): 0.406
Mechanical “Q” (Qms): 6.936
Total Speaker “Q” (Qts): 0.384
Equivalent Compliance (Vas): 6.131 cu. ft. / 173.51 liters One-Way, Linear Excursion (Xmax)*: 0.475 in. / 12.1 mm
Reference Efficiency (no): 0.375%
Efficiency (1W/1m)**: 87.71 dB SPL
Effective Piston Area (Sd): 105.774 sq. in. / 0.0682 sq. m. DC Resistance (Re): 4.114 ohm
Nominal Impedance (Znom): 4 ohm
Thermal Power Handling (Pt): 200W
Driver Displacement: 0.05 cu. ft. / 1.42 liters
Net Weight: 11.21 lbs. / 5.08 kg

Posted: **Sun Dec 18, 2005 12:46 am**

yeah i got those.. i dn't think thas everythign i need for winisd.

Posted: **Sun Dec 18, 2005 6:22 am**

i think winisd fills in what you dont have based on the other numbers.....at least one of the three programs i have does that and i think its win