Running Amp Wires Through a 2000 Buick Park Ave
Posted: Sun Jul 07, 2013 6:36 pm
by skillet19904
I need help running the power wires and the RCA wires through my Buick. I've done other cars but in my Buick everything seems sealed off really well. First where would be the best location to run the power wire through the firewall. Second how would I run the RCA and remote wire behind the head unit. Behind the head unit seems sealed off.
Posted: Mon Jul 08, 2013 6:06 am
by JeremyC
What size power wire?
Posted: Mon Jul 08, 2013 9:23 am
by skillet19904
JeremyC wrote:What size power wire?
4 Guage
Posted: Tue Jul 09, 2013 3:02 am
by huntervina9x
Posted: Tue Jul 09, 2013 6:02 am
by JeremyC
4 Gauge you will need a separate grommet.
I would start with the power wire. Take as much of the interior out as you can, open the hood, and find a spot you can drill a hole in the firewall to run the power wire through. Make sure you check both sides of the firewall before you drill. I almost always run the power wire on the same side of the battery, but sometimes there just isn't room.
Run the wire through the new hole, slide your grommet into place, and add a little silicone to make a seal.
Now run the rcas down the other side along with the speaker wires.
But the interior back together.
Running Amp Wires Through a 2000 Buick Park Ave
Posted: Sun Jun 14, 2015 7:28 am
by Sorge1992
Absolutely with you it agree. In it something is also I think, what is it good idea.