Car Audio Central - Ultimate Car Audio Forum and Community

Posted: **Sat Apr 16, 2005 6:28 pm**

Ok, as pathetic as it may sound I have NEVER installed or messed with a CD Changer.

There is a Pioneer 6 Disc changer sitting in front of me. CDX-P650 (circa 2000 area).

Anyhow there are some CDs stuck in the sleeve. We want to get them out, and dont have the ability to hook up this. I have a 12V power supply sitting here also.

There is an IP Bus plug and a white plug with two wires coming off it. Both black, one real long runs w/IP bus. The other is short and have no connector...

Anyone?

Posted: **Sat Apr 16, 2005 8:53 pm**

Come on guys....

help a tired guy out here

Someone answer this by morning, please :)

Posted: **Sat Apr 16, 2005 9:35 pm**

just check for resitance with a volt meter. if its a circut the hook it up to the power supply, both ways and see if it turns on. i hate technical terms ie IP Bus. there has to be some simple way of turning it on, its just DC.

Posted: **Sun Apr 17, 2005 5:39 am**

the long wire is your +12VDC
the short one is ground.

connect the two to the power supply and hit the eject button.

Posted: **Sun Apr 17, 2005 6:15 am**

Take a look inside and see if there is a manual eject. There should be one.

Posted: **Sun Apr 17, 2005 7:28 am**

Hope your right Kiki....lol, both wires are black

- neither are fused...

I have no instructions for this either...

There is a reset button (kind you use a ball point pen) but no manual eject.

I will try again next weekend :) Im back home now

Car Audio Central - Ultimate Car Audio Forum and Community

Pioneer CD Changer

Pioneer CD Changer