Page 1 of 2
Amp trouble
Posted: Sun Sep 14, 2008 9:32 pm
by jgs07
i was trying to fix the rca's on my amp that is feeding my interiors and by accident i disconnected a blue wire that connects the amp that is feeding my interiors to the amp that is powering my subs. does anyone know where i am suppose to connect the blue wire to? one end is still connected to the amp that is powering the subs. i just dont know where the blue wire goes on to the amp that is powering the interiors.
Posted: Sun Sep 14, 2008 9:52 pm
by Bwcad1
its most likely the remote wire but i cant be sure. can you get us a picture? there are 3 major wires on your amp positive (batt 12v) negative (ground) and Remote wire.
Posted: Sun Sep 14, 2008 11:16 pm
by jgs07
here are the pics. i think i should mention that both amps share the same 4 gauge wire.
Posted: Mon Sep 15, 2008 2:05 am
by Ryan from Ohio
Little blue wire is the remote turn on.
Posted: Mon Sep 15, 2008 11:08 am
by jgs07
yeah but where do i connect it to on the amp that is powering the interior speakers?
Posted: Mon Sep 15, 2008 11:15 am
by Bwcad1
the plug that says remote wire.
Posted: Mon Sep 15, 2008 5:56 pm
by jgs07
ok thanks for the help. got one more quick question though. how is it that both amps are sharing the same 4 gauge wire? the guy who installed never really told me.
Posted: Mon Sep 15, 2008 6:29 pm
by Chris from Washington
Do you have 4 gauge going to each amp?
Follow the wire back, and see if there is a distribution block.
Posted: Mon Sep 15, 2008 8:06 pm
by jgs07
yeah there is a distribution block. does this distribution block in any way lessen the performance of the amps?
Posted: Mon Sep 15, 2008 8:37 pm
by Bwcad1
Nope as long as its the same size