My Comp VR Is Gunna Blow

sinister audio · Post by **sinister audio** » Wed May 11, 2005 8:21 pm

that sub in a sealed box still should pound really hard and not distort very easily

Fishy · Post by **Fishy** » Wed May 11, 2005 8:28 pm

Sealed subs reach full excursion a lot easier than ported. He's talking about "slap" which makes me think he's just pushing the thing too hard. If he's got the right sub, its wired correctly, he's running things flat, and if he's set the gains properly what else could it be?

I think Quad may simply be a dB monster.

-Fishy

sinister audio · Post by **sinister audio** » Wed May 11, 2005 8:31 pm

maybe there is something wrong with the amp all along or like crushed rca's or something to make the amp clip like crazy

Fishy · Post by **Fishy** » Wed May 11, 2005 8:36 pm

I dunno, maybe just a really crappy ground and he's getting a huge voltage drop. What I don't get is the "plenty of excursion, no output" thing. Thats a Kicker made box isn't it? You'd think they'd get the volume right. I'd like to know the exact dimensions anyways.

-Fishy

sinister audio · Post by **sinister audio** » Wed May 11, 2005 8:41 pm

maybe a leaky box? that could be if its not a kicker box, or a cheap box that flexes? i have seen that happen before

NorthQuad · Post by **NorthQuad** » Wed May 11, 2005 8:49 pm

Fishy, My old 12's were in a sealed box that I made in high school, I just kinda winged it. The measurements on this box are 17x15 on top and 14 inches from top to bottom one end and the other end is 11. Here is a pick of my old box and subs, don't laugh too hard I didn't really know what I was doing but the sub's were loud and no leaks. It was in my F-150 and has taken a beating over the years. She's still solid.[img][IMG]http://i6.photobucket.com/albums/y232/N ... IM0202.jpg[/img][/IMG]

NorthQuad · Post by **NorthQuad** » Wed May 11, 2005 8:53 pm

Fishy not on the box shown but the Kicker made box are those dimensions above, it is 3/4" also.

sinister audio · Post by **sinister audio** » Wed May 11, 2005 8:58 pm

im getting stumpped, i wish i was there or any of us at that i know we could figure it out in 5 min.

Fishy · Post by **Fishy** » Wed May 11, 2005 9:49 pm

Ok 17x15x14x11 with 3/4" mdf should equal about

15.5*13.5*10.25 + .5*15.5*13.5*2.25

= 2380 in^3 = 1.38 ft^3 gross

gross volume - sub displacement = 1.38 - .07 = 1.31 ft^3 net

That should be plenty for that sub shouldn't it?

-Fishy

Fubar · Post by **Fubar** » Wed May 11, 2005 10:24 pm

yes fishy.. it should hit fine with that box.. i'm stumped