Page 6 of 10

Posted: Wed Mar 22, 2006 8:19 am
by sinister audio
i have an re12.1 right now its in a box that flexs like crazy. 34hz will make it bow about a 1/4" do im making bracing and i hope to get better then ill make the port bigger. my goal is 145 then ill add another sub and amp and hopefully be at 150 or more.

Posted: Wed Mar 22, 2006 8:22 am
by Bwcad1
lol take advice from me on this one more sub and one more amp isnt gonna do much for you if you dont have the electricle system to support it. what do you have now? if your only running one battery under the hood get a 2150 or a nsb90 im gonna reccomend at least 8 runs of power and 8 full ground runs back to the battery of 1/0. in usaci u can run your car so upgrade your alt to a min 200amp and i dont know the batt rules in usaci but add another if you can. with out this i highly doubt your gonna break a 150.

Posted: Wed Mar 22, 2006 8:24 am
by sinister audio
ya ill be upgrading the electrical too. right now my system can support right around 100 amps of current draw. im gonna probaly get around a 240 amp alt or more. then i was gonna upgrade the batterys.

Posted: Wed Mar 22, 2006 8:26 am
by Bwcad1
call me i want to hook u up with a RE guy i know ;) and an alternator guy i know lol

Posted: Wed Mar 22, 2006 8:28 am
by sinister audio
i just have to send in my sales tax number to your alternator guy then ill be setup with him i just havent done it yet. also i gotta make some more cash before i can go all out on my car.

Posted: Wed Mar 22, 2006 9:41 am
by Bwcad1
let me know what you need i may have some stuff sitting around. do you need buss bars or anything like that? i have a shiload of stuff just sitting around. i have a ton of boxes 2.

Posted: Wed Mar 22, 2006 9:55 am
by Darthness
8 power wires?! what do you use the other 7 for?

Posted: Wed Mar 22, 2006 10:03 am
by Bwcad1
lol yes more wire = less resistance = MORE POWER!!! lol look at any high end spl vehicle and you will see tons and tons of 1/0 for instance tonigh i amp putting 10 runs of power and 10 runs of ground in my blazer. the jimmy will have approximatly 20+ runs of each also. dont forget you have to run with the car off in dbdrag so every little bit counts ;) i know guys who see huge gains from adding multiple runs.

Posted: Wed Mar 22, 2006 10:14 am
by Darthness
where do these runs of power wire go?

Posted: Wed Mar 22, 2006 10:22 am
by Bwcad1
http://audioforum.termpro.com/ubb/ultim ... 14948.html check that out. the other runs connect to whats called a buss bar which is basiclly a piece of metal usually copper. then from that to the amp.