Page 4 of 6
Posted: Wed May 03, 2006 8:47 pm
by Robert Wollenberg
I could be any number of things. They'll have to try a few things to know for sure. I'm betting your RCA still has a lot to do with it. That and/or a ground issue somewhere.
Posted: Thu May 04, 2006 3:07 am
by Darthness
i turned the gain down some, we'll see how that goes and i'll see if it decides to come back... if its that doesn't fix it i'll check the ground.
Posted: Thu May 04, 2006 3:14 am
by Robert Wollenberg
Do you know how to use a dmm?
Posted: Thu May 04, 2006 5:28 am
by NViejeP
My gain was on full, thats how the shop set it.
I truned it all the way down and it was gone. Now I turned it to about half and the sound is still there but you have to really be looking for it to notice.
Posted: Thu May 04, 2006 5:35 am
by Robert Wollenberg
Do you know how to use a DMM? If so, you can be a lot more acurate with setting the gain. Just follow the JL Audio tutorial. If you need help, we'll help you.
Posted: Thu May 04, 2006 5:40 am
by NViejeP
No I dont know how to use a DMM, do I have to buy it?
Do you think it's normal that the sound is there because of the gain control? Or should I get it fixed?
Posted: Thu May 04, 2006 9:02 pm
by Robert Wollenberg
I'd say you still have a problem that needs to be fixed. Typically a grounding issue somewhere. Or maybe just really cheap RCAs. If you spent $1.25 on your RCA from Radio Shack, you're hurting. lol.
Posted: Thu May 04, 2006 9:15 pm
by NViejeP
The RCAs came from KnuKonceptz eko 4AWG kit.
Posted: Thu May 04, 2006 9:19 pm
by High Society
Are the RCA's ran on the opposite side of the power? I dunno if it was asked yet.
Posted: Thu May 04, 2006 9:59 pm
by Robert Wollenberg
The RCA is ran with the power wire. I think that's the first step to fixing this.